VTube-STEP v1.95

From ATTWiki
Revision as of 01:40, 7 September 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo.jpg

Revision 1.95

Vtube-step-1.87 screenimage.png





Check.jpg FIXED: IMPORT Menu

  • The IMPORT menu would not store the button order setup. This has been repaired.

Vtube-step-1.95 import button display.png

Check.jpg ENHANCED: IMPORT/EXPORT Display Menus

  • The Import and Export button display editors are now easier to use. When moving a button name from one list to the other, the selected item in the current list box remains selected. This allows for quicker repeat list moves without having to reselect a button name every time a move is finished.


  • The Import and Export button display editors can now move all the button names from one list to the other.

Vtube-step-1.95 import export button display editor.png




Check.jpg ENHANCED: TRUE Radius Output for Alpine M4 Export

  • VTube uses a RADIUS TABLE to output true centerline radii for applications that use non-nominal (usually undercut) bend dies.
  • The Alpine M4 Export now uses the RADIUS Table to output the actual true radius value.

  • The Alpine M4 Export menu includes a new RADIUS TABLE SETUP button for direct access to the radius values to use before export.

Vtube-step-1.94 AlpineM4Export radius table.png




Check.jpg ENHANCED: TRUE Radius Output Button for Supravision Export

  • VTube uses a RADIUS TABLE to output true centerline radii for applications that use non-nominal (usually undercut) bend dies.
  • The Supravision Export menu includes a new RADIUS TABLE SETUP button for direct access to the radius values to use before export.

Vtube-step-1.95 SupravisionExport radius table.png



Check.jpg ENHANCED: Language Editor Now Includes Hints Column

The language editor now includes a Hints column for translating buttons where the hints should be displayed with a mouse hover over that button.

Vtube-1.95 language editor hints column.png



Other