Eaton Leonard Lightspeed Communications Setup
From ATTWiki
This document outlines the basic communications setup for a Lightspeed control. |
|
|
Contents |
SVNET Communications Setup Instructions for use with VTube-LASER and VTube-STEP
STEP 1: System Menu and Administrative Control
Change to the Systems menu. If you are not running the operator station as an administrator, then press SECURITY and enter the administrator code. (The default code is "123".) Press the DEVICE CONFIG button. |
STEP 2: Device Config / Machine Menu
In DEVICE CONFIG, enter the MACHINE menu. Select a Measure Machine tab. LightSpeed can store four simultaneous measuring center setups for connection to multiple measuring centers.
|
Other Pages
|