End-Scan Using the End Wall
From ATTWiki
How to perform the end-wall end scan.
|
Why the End-Scan technique is important
This end-scan method is useful for increase in precision over the scissor method.
|
Measure Setup
|
How To Use This End-Scan Technique
The advantage of this method is that it is easy to use. The disadvantage is that it is more prone to outlier points from the inner diameter surface. |
Another Way to Use This End-Scan Technique
The advantage of this method is that it is less prone to outlier points. The disadvantage is that it is hard to aim at thinner walls. |
Other Pages
- See also End-Scan Using the Scissor Motion
- See also End-Scan Using End Targets
- Back to VTube-LASER