CNC Bender v11-20091218
|
REPAIR - Feed Accuracy Issues During Feed/Rotate Motion When Bend Arm Returning
|
|
CHANGE - Removed TOLERANCE Option from AXIS File
This feature was originally introduced in version CNC Bender 10.0.6.0m - Tolerance Move Skip in November of 2006. It was intended to reduce problems with the axes floating near zero, and Absolute moves having difficulty determining which way to move into position. (For example, the Feed axes could attempt to run backwards behind zero under very rare circumstances until version CNC Bender v11-20091201, where all axes are now kept far from internal zero.) Because of the permanent resolution to the absolute direction problem in version CNC Bender v11-20091201, and because of the problems caused by this option as discussed in previous sections, it was removed from CNC Bender. |
REPAIR - For [BEGIN RUN AGAIN] Feature
|
The benefit is removal of all latency when the process initializes all axes for loading the next part into the machine. |
Other Pages
- Back to CNC Bender
- Back to CNC Bender Software Updates
- See CNC Bender General Information
- See Final Feed Clearance