VTube Rectangular Tubes

From ATTWiki
Revision as of 20:20, 23 June 2013 by Mcone (Talk | contribs)

Jump to: navigation, search

Contents

VTube Rectangular Tubes

Vtube-step logo.jpg
Vtube-laser logo.jpg

VTube-STEP and VTube-LASER can handle rectangular tube shapes as well as cylindrical.


VTube-STEP

VTube can draw rectangular or square tubing. The dimensional controls are in the Part Setup menu of both STEP and LASER modes:

Vtube-1.82 rectangular partsetup dimensions.jpg

Vtube-step-1.82.rectangulartube 7points.jpg




Profiles

Square Tube

Set Width1 and Width2 to the same values to draw square tube.

Vtube-1.82 rectangular endsample values 3.jpg
Vtube-1.82 rectangular endsample 3.jpg

Rectangular - Bending "Easy Way"

For rectangular tube, this is the most common configuration used because the bending is easier than when the profile is rotated 90 degrees to this orienation.

Vtube-1.82 rectangular endsample values 1.jpg
Vtube-1.82 rectangular endsample 1.jpg

Rectangular - Bending "Hard Way"

You can switch the values in the Width1 and Width2 to rotate the tube shape into the "hard way" bending method.

Vtube-1.82 rectangular endsample values 2.jpg
Vtube-1.82 rectangular endsample 2.jpg

Magic View & Converter

We recommend Magic View & Converter to import and view CATIA notes files. (This is only a viewer program.)

Magicviewconverter screen solid.jpg

Magicviewconverter screen.jpg

AutoCAD to STEP Plug-in

Syscode autocad step.jpg



Other Pages