Difference between revisions of "About VTube-LASER End Angle Qualification"

From ATTWiki
Jump to: navigation, search
(Created page with "<table> <tr cellpadding=10> <td width=225> 300px ==About VTube-LASER End Engle Qualifications== </td> <td width=300> image:vtube-las...")
 
(→‎Set the Datum)
Line 30: Line 30:
 
</td>
 
</td>
  
−
</tr>
 
−
 
−
</table>
 
−
<br><br>
 
−
 
−
==Set the Datum==
 
−
 
−
<table cellpadding=10 width=900>
 
−
 
−
<tr valign=top>
 
−
<td width=300>
 
−
It's necessary to set the datum using the Datum tab in the MASTER DATA menu.<br><br>
 
−
It may also be necessary to rotate the master tube into the an orientation that is similar to the print. In this case, we used the Transform feature to rotate the master tube so that the first leg is aligned to the Y axis.</td>
 
−
<td>
 
−
[[image:set the datum.png|500px]]
 
−
</td>
 
 
</tr>
 
</tr>
  

Revision as of 22:56, 22 March 2019

Vtube-laser logo 1.96.png


Contents

About VTube-LASER End Engle Qualifications

Vtube-laser v2.7 screenshot.png


Sample Print

The end angle deviation is the total angle the measured centerline end length varies from the master end length in degrees.

VTube-LASER includes end-angle qualifications because GMC used to include +/- 1 degree for the end-length qualification.

However, it is our opinion that this qualification is redundant because the end lengths are already qualified in the tangent-midpoint-tangent grid. In general, it is better to qualify a tube shape using linear units than polar (angular) units.

EndAngleDeviations.png



Datum Reports

After a measure and alignment, use one of the Datum reports in the report menu to show the dimensions.

In this example, the two X values show the dimensions that correspond to the 5.5 dimension.

Datumreporttemplate.png

Datumreport1.png

Datumreport2.png



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=About_VTube-LASER_End_Angle_Qualification&oldid=39874"