Difference between revisions of "VTube-STEP v1.97"

From ATTWiki
Jump to: navigation, search
(25px NEW: Import SolidWorks 3DSketch Into VTube)
(25px NEW: Import SolidWorks 3DSketch Into VTube)
Line 30: Line 30:
 
VTube can now import tubes from SolidWorks.<br><br>
 
VTube can now import tubes from SolidWorks.<br><br>
  
TThis means that the loop is closed between VTube and SolidWorks.  VTube can build parametrically constrained tubes in SolidWorks as well as import parametric tubes.<br><br>
+
This means that the loop is closed between VTube and SolidWorks.  VTube can build parametrically constrained tubes in SolidWorks as well as import parametric tubes.<br><br>
  
  

Revision as of 15:31, 5 November 2014

Vtube-step logo.jpg

Revision 1.97

Vtube-step-1.87 screenimage.png





Check.jpg NEW: Import SolidWorks 3DSketch Into VTube

VTube can now import tubes from SolidWorks.

This means that the loop is closed between VTube and SolidWorks. VTube can build parametrically constrained tubes in SolidWorks as well as import parametric tubes.


How it Works

1 - Draw the tube centerline in 3DSketch. The centerline can have intersecting lines or not (VTube can figure it out). Include fillets so that VTube can extract the radii too. You can even draw tubes with contiguous arcs (where the arcs touch each other without straights). VTube can even handle 180 degree bends.

2 - While SolidWorks is in 3DSketch mode, switch to VTube and import the 3DSketch. Before importing the sketch, you can even enter a diameter and wall thickness.

Vtube-step-1.97 import SolidWorks button importmenu.png

Vtube-step-1.97 import solidworks window.png

Vtube-step-1.97 import SolidWorks 3DSketch.png

Vtube-step-1.97 SolidWorks 3DSketch.png

Vtube-step-1.97 imported sw part.png

Check.jpg NEW: Laservision CSV File Import

VTube can now import Laservision CSV files.

These files contain the part number, comment, linear unit setting, XYZ coordinates, bend radii, diameter, and default tolerance.

How it Works

1 - Press the Laservision CSV Import button.

Vtube-step-1.97 import laservision csv.png

2 - Choose the CSV file, and press Open.

Vtube-step-1.97 import laservision csv dialog.png



Vector tube data center.jpg

Check.jpg NEW: Enter a Tube Wall Thickness in the Import Excel XLS Window

The Import Excel XLS window now allows you to enter a wall thickness as well as a diameter.

Vtube-step-1.97 import xls wall.png

Check.jpg Other Changes

  • No other changes

Other