Difference between revisions of "VTube-LASER ROMER RDS Performance Recommendations"

From ATTWiki
Jump to: navigation, search
(Recommended RDS Computer IP Setup)
(About HEXAGON RDS ("ROMER Data Service") Software)
 
(125 intermediate revisions by one user not shown)
Line 1: Line 1:
  
<table width= 600>
+
<table width= 1000>
 
<tr cellpadding=10>
 
<tr cellpadding=10>
<td width=200>
+
<td width=400>
 
+
__TOC__
<h3>Information about RDS performance with VTube-LASER</h3>
+
<br><br>
+
* Back to [[VTube-LASER]]
+
 
</td>
 
</td>
<td width=700>
+
<td width=600>
[[image:ROMER_Scanner_Plus_Hex_Logo.png|200px]]
+
[[image:VTube-LASER_HEXAGONRDS_with_AS1_Scanner.png|500px]]<br><br>
 
</td>
 
</td>
 
</tr>
 
</tr>
 
</table>
 
</table>
  
 +
<br><br>
  
See also [[RDS Versions for ROMER Scanners]]
+
* Back to [[VTube-LASER]]
 +
* See also [[RDS Versions for ROMER Scanners]]
 +
* See [[HEXAGON Absolute Arm Feature Packs or Control Packs]]
  
__NOTOC__
 
  
==About ROMER RDS==
+
==About HEXAGON RDS ("ROMER Data Service") Software==
 
   
 
   
 
<table width= 600>
 
<table width= 600>
 
<tr cellpadding=10>
 
<tr cellpadding=10>
 
<td width=200>
 
<td width=200>
ROMER RDS is a driver system that connects software like VTube-LASER to any ROMER arm that uses the RDS driver. See this page for details all the different arms that RDS can connect VTube-LASER to:
+
HEXAGON RDS (from "ROMER Data Service") is a software system that connects software like VTube-LASER to any HEXAGON measuring device that uses the RDS.<br><br>See [[RDS Versions for ROMER Scanners]] for details of the different arms that RDS can connect VTube-LASER to.
 +
 
 +
<br><br><br>
 
</td>
 
</td>
 
</tr>
 
</tr>
 
</table>
 
</table>
  
==RDS Performance Notes==
+
=HEXAGON RDS 6 Section=
   
+
 
<table width= 900>
+
==How to Configure the RDS VERSION 6.2 Control Panel==
 +
 
 +
{| class="wikitable" style="width: 800px;"
 +
!Comment !! Image
 +
|-
 +
| Left click on the up arrow in the system tool tray.<br><br>Left click on the blue R. || [[image:RDS6_systooltray.png|600px]]
 +
|-
 +
| Left click on the gear icon in the floating window. || [[image:RDS6_gear.png|600px]]
 +
|-
 +
| Click on Connection || [[image:RDS6_connection.png|600px]]
 +
|-
 +
| 1 - Check the instrument type.<br><br> 2 - Check to see that an IP address was served to the Ethernet port connected to the arm.<br><br> 3 - Check the link type.<br><br>If you have any questions about these settings, please contact [email protected] || [[image:RDS6_connection_check.png|600px]]
 +
|-
 +
| Click the RSx button. This button only appears if the laser scanner is switched on and connected. || [[image:RDS6_RSx_button.png|600px]]
 +
|-
 +
| Change to Advanced mode. This mode lets you edit the settings in this menu.|| [[image:RDS6_RSx_advanced.png|600px]]
 +
|-
 +
| For the RS5 scanner (not shown here), set all the values like you see here, then "Save As" in step 4 to save the "Scanning profile" - which means you are saving the scanning configuration.<br><br>For the RS6 or the AS1 scanner, reduce the Point sampling to as low as it can go (50%), then set the Exposure mode to SHINE.  Also, do not reduce the angle of incidence value - or RDS will not allow you to scan around the edges of tube shapes.|| [[image:RDS6_RSx_setup.png|600px]]
 +
|-
 +
| Change to the Advanced settings menu. Unless you know you want this feature, disable the remote mouse.|| [[image:RDS6_RSx_advanced_remote_mouse.png|600px]]
 +
|-
 +
| Press save. || [[image:RDS6_RSx_save.png|600px]]
 +
|-
 +
| Press quit. || [[image:RDS6_RSx_quit.png|600px]]
 +
|}
 +
 
 +
=HEXAGON RDS 5 Section=
 +
 
 +
==How to Configure the RDS VERSION 5 Control Panel==
 +
 
 +
<table width= 1000 >
 +
 
 
<tr cellpadding=10>
 
<tr cellpadding=10>
<td width=300>
+
<td width=300 valign=top>
When idling, the RDS service requires only 1 to 5 percent of the CPU usage.<br><br>
+
Right click on the R icon in the System Tray. If it is not in the menu on the bottom right, then left click on "Show Hidden Icons" button in the System Tool Tray. Then right click on the R icon in that menu.<br><br>
When scanning, RDS can take up to 20% of the CPU usage.<br><br>
+
It is very important that other processes are not causing the CPU usage to rise to 100%. If you have other services that send the CPU over 50%, you may experience less than ideal scanning responses.
+
 
</td>
 
</td>
 
<td>
 
<td>
[[image:RDS Popup Menu.png|200px]]
+
[[image:Windows 10 System Tray R Icon.png|300px]]<br><br>
 +
</td>
 +
</tr>
 +
 
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 +
Left click on the Control Panel icon in the menu that pops up.<br><br></td>
 +
<td>
 +
[[image:RDS System Tray Panel Menu.png|300px]]<br><br>
 
</td>
 
</td>
  
 
</tr>
 
</tr>
  
<table width= 900>
 
 
<tr cellpadding=10>
 
<tr cellpadding=10>
<td width=300>
+
<td width=300 valign=top>
You can watch the CPU usage in the Windows Task Manager.<br><br>
+
You may also see a menu like this one if you click on the R inside the right click menu. Click on the Control Panel icon in the popup menu.<br><br></td>
In Windows 10, to display the Task Manager, right click on the task bar at the bottom of the Windows desktop and choose "Task Manager" from the popup menu.
+
<td>
 +
[[image:RDS popup Control Panel.png|300px]]<br><br>
 
</td>
 
</td>
 +
 +
</tr>
 +
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 +
Select any Control Panel menu with the buttons on the left to show different menus on the right.<br><br></td>
 
<td>
 
<td>
[[image:RDS in Task Manager.png|600px]]
+
[[image:RDS Control Panel Menu Buttons.png|300px]]<br><br>
 
</td>
 
</td>
 +
 
</tr>
 
</tr>
  
Line 60: Line 105:
 
<br><br>
 
<br><br>
  
 
+
==Recommended RDS Version 5 Control Panel Setup==
==Recommended RDS Computer IP Setup==
+
 
   
 
   
 
<table width= 1000 >
 
<table width= 1000 >
 
<tr cellpadding=10>
 
<tr cellpadding=10>
 
<td width=300 valign=top>
 
<td width=300 valign=top>
The ROMER scanners communicate with the computer with two cable connections:<br><br>
+
This is how we recommend that you setup the RSx menu in the RDS Control Panel for VTube-LASER.<br><br>Click on the RSx menu button on the left to see these settings.<br><br>
 +
* Capture mode: Keep button pressed<br><br>
 +
* Sound guide: Unchecked (OFF)<br><br>
 +
* Point Sampling: 25% (or the lowest available)<br><br>
 +
* Behavior when press the left and right buttons: Switch exposure mode<br><br>
 +
* Exposure mode: Automatic<br><br>
 +
</td>
 +
<td>
 +
[[image:RDS Control Panel v5 - RSx Menu.png|700px]]<br><br>
 +
</td>
  
# A TCPIP connection (standard network) is used for the SCANNER.<br><br>
+
</tr>
# A USB cable connection is used to send the ball probe position.<br><br>
+
  
This means that ROMER requires two cables per arm with scanners.<br><br>
+
<tr cellpadding=10>
The newer RS4 ROMER power packs (on the back of the base of the arm) can automatically serve an IP address to the computer using DHCP.<br><br>
+
<td width=300 valign=top>
In some cases, we found that this interferes with communications through other NIC ports - especially when you are browsing the internet.<br><br>
+
The way to overcome this is to discover what IP address the ROMER arm prefers for the computer, then FIX the IP to that address.<br><br>
+
On our test computers the preferred address is 19.168.178.11.
+
<br><br>
+
 
To change any of these settings, you will need to change users from Standard mode to Advanced mode.  Click on the Standard user button on the upper right corner, then change to Advanced mode by entering the password. The default password is "Advanced".<br><br>
 
To change any of these settings, you will need to change users from Standard mode to Advanced mode.  Click on the Standard user button on the upper right corner, then change to Advanced mode by entering the password. The default password is "Advanced".<br><br>
 
If you want to, you can save a custom profile (setup) as something like "VTube-LASER".
 
If you want to, you can save a custom profile (setup) as something like "VTube-LASER".
 
</td>
 
</td>
 
<td>
 
<td>
[[image:RDS Computer IP Address.png|700px]]<br><br>
+
[[image:RDS Control Panel v5 - RSx Menu - Advanced User.png|700px]]<br><br>
 
</td>
 
</td>
  
Line 88: Line 136:
 
<br><br>
 
<br><br>
  
==Recommended RDS Control Panel Setup==
+
 
 +
<table width= 1000 >
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 +
It is important to disable the Remote Mouse.  Remote Mouse allows the arm to act as a mouse - which we do not recommend unless you know that you want to use the arm as a mouse and you know how it works.<br><br>
 +
</td>
 +
<td>
 +
[[image:RDS Control Panel v5 - Advanced Settings Menu.png|700px]]<br><br>
 +
</td>
 +
 
 +
</tr>
 +
</table>
 +
 
 +
<table width= 1000 >
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 +
When you make changes, RDS will allow you to save the RDS setup changes with a visible SAVE button on the bottom right corner. Click this button before you exit ("Quit") the Control Panel.<br><br>
 +
</td>
 +
<td>
 +
[[image:RDS Control Panel v5 - Save Button.png|700px]]<br><br>
 +
</td>
 +
 
 +
</tr>
 +
</table>
 +
 
 +
<table width= 1000 >
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 +
Click the Quit button to close the Control Panel.<br><br>
 +
</td>
 +
<td>
 +
[[image:RDS Control Panel v5 - Quit Button.png|700px]]<br><br>
 +
</td>
 +
 
 +
</tr>
 +
</table>
 +
 
 +
=HEXAGON RDS 4 Section=
 +
 
 +
==How to Enter the RDS VERSION 4 Control Panel==
 +
 
 +
<table width= 1000 >
 +
 
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 +
Left click on "Show Hidden Icons" button in the System Tool Tray.<br><br>
 +
</td>
 +
<td>
 +
[[image:Windows 10 Show Hidden Icons.png|300px]]<br><br>
 +
</td>
 +
</tr>
 +
 
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 +
Right click on the measuring center icon.<br><br></td>
 +
<td>
 +
[[image:RDS Arm Icon in System Icons.png|300px]]<br><br>
 +
</td>
 +
 
 +
</tr>
 +
 
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 +
Left click on the RDS Control Panel in the popup menu.<br><br></td>
 +
<td>
 +
[[image:RDS popup Control Panel.png|300px]]<br><br>
 +
</td>
 +
 
 +
</tr>
 +
 
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 +
Select any Control Panel menu with the buttons on the left.<br><br></td>
 +
<td>
 +
[[image:RDS Control Panel Menu Buttons.png|300px]]<br><br>
 +
</td>
 +
 
 +
</tr>
 +
 
 +
 
 +
 
 +
</table>
 +
<br><br>
 +
 
 +
==Recommended RDS Version 4 Control Panel Setup==
 
   
 
   
 
<table width= 1000 >
 
<table width= 1000 >
 
<tr cellpadding=10>
 
<tr cellpadding=10>
 
<td width=300 valign=top>
 
<td width=300 valign=top>
This is how we recommend that you setup the RSx menu in the RDS Control Panel for VTube-LASER.<br><br>
+
This is how we recommend that you setup the RSx menu in the RDS Control Panel for VTube-LASER.<br><br>Click on the RSx menu button on the left to see these settings.<br><br>
 
* Capture mode: Keep button pressed<br><br>
 
* Capture mode: Keep button pressed<br><br>
 
* Sound guide: Unchecked (OFF)<br><br>
 
* Sound guide: Unchecked (OFF)<br><br>
Line 99: Line 231:
 
* Behavior when press the left and right buttons: Switch exposure mode<br><br>
 
* Behavior when press the left and right buttons: Switch exposure mode<br><br>
 
* Exposure mode: Automatic<br><br>
 
* Exposure mode: Automatic<br><br>
<br><br>
+
</td>
 +
<td>
 +
[[image:RDS Control Panel - RSx Menu.png|700px]]<br><br>
 +
</td>
 +
 
 +
</tr>
 +
 
 +
<tr cellpadding=10>
 +
<td width=300 valign=top>
 
To change any of these settings, you will need to change users from Standard mode to Advanced mode.  Click on the Standard user button on the upper right corner, then change to Advanced mode by entering the password. The default password is "Advanced".<br><br>
 
To change any of these settings, you will need to change users from Standard mode to Advanced mode.  Click on the Standard user button on the upper right corner, then change to Advanced mode by entering the password. The default password is "Advanced".<br><br>
 
If you want to, you can save a custom profile (setup) as something like "VTube-LASER".
 
If you want to, you can save a custom profile (setup) as something like "VTube-LASER".
 
</td>
 
</td>
 
<td>
 
<td>
[[image:RDS Control Panel - RSx Menu.png|700px]]<br><br>
 
 
[[image:RDS Control Panel - RSx Menu - Advanced User.png|700px]]<br><br>
 
[[image:RDS Control Panel - RSx Menu - Advanced User.png|700px]]<br><br>
 
</td>
 
</td>
Line 138: Line 277:
  
  
==ROMER Versions==
+
==ROMER Driver Downloads==
 
   
 
   
 
<table width= 600>
 
<table width= 600>
 
<tr cellpadding=10>
 
<tr cellpadding=10>
 
<td width=200>
 
<td width=200>
RDS 4.2.1 and 4.2.2 work well. v4.2.2 and newer has anti-outlier (anti-flyer) algorithms for highly reflective surfaces.<br><br>
+
* RDS 5 works well and is required for the HEXAGON 8-series arms.<br><br>
 +
* RDS 4.2.1 and newer work well for the 7-series arms. Version 4.2.2 and newer has anti-outlier (anti-flyer) algorithms for highly reflective surfaces.<br><br>
 +
Download the latest tested ROMER RDS driver from this page: [https://www.advancedtubularsupport.com/romer-arm-drivers.html Advanced Tubular ROMER Driver Support Page.]
 
</td>
 
</td>
 
</tr>
 
</tr>
Line 149: Line 290:
 
<br><br>
 
<br><br>
  
==How to Determine Your Current RDS Version==
+
==How to Determine Your Current RDS 4.X Version==
  
<table width= 600>
+
<table width= 1000>
 
<tr cellpadding=10>
 
<tr cellpadding=10>
<td width=200>
+
<td width=300>
 
Left click on the System Tray icon.
 
Left click on the System Tray icon.
 
</td>
 
</td>
Line 162: Line 303:
  
 
<tr cellpadding=10>
 
<tr cellpadding=10>
<td width=200>
+
<td width=300>
 
Right click on the measuring center icon.
 
Right click on the measuring center icon.
 
</td>
 
</td>
Line 171: Line 312:
  
 
<tr cellpadding=10>
 
<tr cellpadding=10>
<td width=200>
+
<td width=300>
 
Left click on About.
 
Left click on About.
 
</td>
 
</td>
Line 194: Line 335:
 
<br><br>
 
<br><br>
  
==Other Pages==
+
==RDS Performance Notes==
 +
 +
<table width= 900>
 +
<tr cellpadding=10>
 +
<td width=300>
 +
When idling, the RDS service requires only 1 to 5 percent of the CPU usage.<br><br>
 +
When scanning, RDS can take up to 20% of the CPU usage.<br><br>
 +
It is very important that other processes are not causing the CPU usage to rise to 100%. If you have other services that send the CPU over 50%, you may experience less than ideal scanning responses.
 +
</td>
 +
<td>
 +
[[image:RDS Popup Menu.png|200px]]
 +
</td>
  
 +
</tr>
 +
 +
<table width= 900>
 +
<tr cellpadding=10>
 +
<td width=300>
 +
You can watch the CPU usage in the Windows Task Manager.<br><br>
 +
In Windows 10, to display the Task Manager, right click on the task bar at the bottom of the Windows desktop and choose "Task Manager" from the popup menu.
 +
</td>
 +
<td>
 +
[[image:RDS in Task Manager.png|600px]]
 +
</td>
 +
</tr>
 +
 +
 +
 +
</table>
 
<br><br>
 
<br><br>
 +
 +
 +
 +
==Other Pages==
 +
 
* Back to [[VTube-LASER]]
 
* Back to [[VTube-LASER]]
 +
* See also [[RDS Versions for ROMER Scanners]]
 +
* See [[HEXAGON Absolute Arm Feature Packs or Control Packs]]

Latest revision as of 18:33, 3 October 2022

Contents

VTube-LASER HEXAGONRDS with AS1 Scanner.png




About HEXAGON RDS ("ROMER Data Service") Software

HEXAGON RDS (from "ROMER Data Service") is a software system that connects software like VTube-LASER to any HEXAGON measuring device that uses the RDS.

See RDS Versions for ROMER Scanners for details of the different arms that RDS can connect VTube-LASER to.




HEXAGON RDS 6 Section

How to Configure the RDS VERSION 6.2 Control Panel

Comment Image
Left click on the up arrow in the system tool tray.

Left click on the blue R.
RDS6 systooltray.png
Left click on the gear icon in the floating window. RDS6 gear.png
Click on Connection RDS6 connection.png
1 - Check the instrument type.

2 - Check to see that an IP address was served to the Ethernet port connected to the arm.

3 - Check the link type.

If you have any questions about these settings, please contact [email protected]
RDS6 connection check.png
Click the RSx button. This button only appears if the laser scanner is switched on and connected. RDS6 RSx button.png
Change to Advanced mode. This mode lets you edit the settings in this menu. RDS6 RSx advanced.png
For the RS5 scanner (not shown here), set all the values like you see here, then "Save As" in step 4 to save the "Scanning profile" - which means you are saving the scanning configuration.

For the RS6 or the AS1 scanner, reduce the Point sampling to as low as it can go (50%), then set the Exposure mode to SHINE. Also, do not reduce the angle of incidence value - or RDS will not allow you to scan around the edges of tube shapes.
RDS6 RSx setup.png
Change to the Advanced settings menu. Unless you know you want this feature, disable the remote mouse. RDS6 RSx advanced remote mouse.png
Press save. RDS6 RSx save.png
Press quit. RDS6 RSx quit.png

HEXAGON RDS 5 Section

How to Configure the RDS VERSION 5 Control Panel

Right click on the R icon in the System Tray. If it is not in the menu on the bottom right, then left click on "Show Hidden Icons" button in the System Tool Tray. Then right click on the R icon in that menu.

Windows 10 System Tray R Icon.png

Left click on the Control Panel icon in the menu that pops up.

RDS System Tray Panel Menu.png

You may also see a menu like this one if you click on the R inside the right click menu. Click on the Control Panel icon in the popup menu.

RDS popup Control Panel.png

Select any Control Panel menu with the buttons on the left to show different menus on the right.

RDS Control Panel Menu Buttons.png



Recommended RDS Version 5 Control Panel Setup

This is how we recommend that you setup the RSx menu in the RDS Control Panel for VTube-LASER.

Click on the RSx menu button on the left to see these settings.

  • Capture mode: Keep button pressed

  • Sound guide: Unchecked (OFF)

  • Point Sampling: 25% (or the lowest available)

  • Behavior when press the left and right buttons: Switch exposure mode

  • Exposure mode: Automatic

RDS Control Panel v5 - RSx Menu.png

To change any of these settings, you will need to change users from Standard mode to Advanced mode. Click on the Standard user button on the upper right corner, then change to Advanced mode by entering the password. The default password is "Advanced".

If you want to, you can save a custom profile (setup) as something like "VTube-LASER".

RDS Control Panel v5 - RSx Menu - Advanced User.png




It is important to disable the Remote Mouse. Remote Mouse allows the arm to act as a mouse - which we do not recommend unless you know that you want to use the arm as a mouse and you know how it works.

RDS Control Panel v5 - Advanced Settings Menu.png

When you make changes, RDS will allow you to save the RDS setup changes with a visible SAVE button on the bottom right corner. Click this button before you exit ("Quit") the Control Panel.

RDS Control Panel v5 - Save Button.png

Click the Quit button to close the Control Panel.

RDS Control Panel v5 - Quit Button.png

HEXAGON RDS 4 Section

How to Enter the RDS VERSION 4 Control Panel

Left click on "Show Hidden Icons" button in the System Tool Tray.

Windows 10 Show Hidden Icons.png

Right click on the measuring center icon.

RDS Arm Icon in System Icons.png

Left click on the RDS Control Panel in the popup menu.

RDS popup Control Panel.png

Select any Control Panel menu with the buttons on the left.

RDS Control Panel Menu Buttons.png



Recommended RDS Version 4 Control Panel Setup

This is how we recommend that you setup the RSx menu in the RDS Control Panel for VTube-LASER.

Click on the RSx menu button on the left to see these settings.

  • Capture mode: Keep button pressed

  • Sound guide: Unchecked (OFF)

  • Point Sampling: 25% (or the lowest available)

  • Behavior when press the left and right buttons: Switch exposure mode

  • Exposure mode: Automatic

RDS Control Panel - RSx Menu.png

To change any of these settings, you will need to change users from Standard mode to Advanced mode. Click on the Standard user button on the upper right corner, then change to Advanced mode by entering the password. The default password is "Advanced".

If you want to, you can save a custom profile (setup) as something like "VTube-LASER".

RDS Control Panel - RSx Menu - Advanced User.png




We recommend that you turn the ROMER sound off in General parameters.

RDS Control Panel - General Parameters Menu.png

ROMER Ball Probe Support

All ball probe systems on devices that run through RDS are compatible with VTube-LASER. (VTube-LASER can use the LASER or the ball probe.)

VTube-LASER works well with systems that only have ball probes. A few of our customers prefer to use only ball probes.




ROMER Driver Downloads

  • RDS 5 works well and is required for the HEXAGON 8-series arms.

  • RDS 4.2.1 and newer work well for the 7-series arms. Version 4.2.2 and newer has anti-outlier (anti-flyer) algorithms for highly reflective surfaces.

Download the latest tested ROMER RDS driver from this page: Advanced Tubular ROMER Driver Support Page.



How to Determine Your Current RDS 4.X Version

Left click on the System Tray icon.

Left click system tray icon.png

Right click on the measuring center icon.

Right click on the measuring center icon.png

Left click on About.

RDS left click on about.png

The RDS About window will display.

RDS4.3.2 About Dialog.png



RDS Performance Notes

When idling, the RDS service requires only 1 to 5 percent of the CPU usage.

When scanning, RDS can take up to 20% of the CPU usage.

It is very important that other processes are not causing the CPU usage to rise to 100%. If you have other services that send the CPU over 50%, you may experience less than ideal scanning responses.

RDS Popup Menu.png

You can watch the CPU usage in the Windows Task Manager.

In Windows 10, to display the Task Manager, right click on the task bar at the bottom of the Windows desktop and choose "Task Manager" from the popup menu.

RDS in Task Manager.png




Other Pages