Difference between revisions of "VTube-LASER Prioritizes Measuring Tube Straights"
(→An Answer For The Marketing Claims of Our Competition) |
(→VTube-LASER Compared to Generic Metrology Software) |
||
Line 16: | Line 16: | ||
<br><br> | <br><br> | ||
− | ===VTube-LASER Compared to Generic Metrology Software=== | + | ===What About VTube-LASER Compared to Generic Metrology Software?=== |
Other generic metrology software, like CAM2 from FARO or Polyworks from Innovmetric, can scan tubing too - but the process is much more complicated than in VTube-LASER.<br> | Other generic metrology software, like CAM2 from FARO or Polyworks from Innovmetric, can scan tubing too - but the process is much more complicated than in VTube-LASER.<br> | ||
For example, one customer told us that, when scanning tube shapes with general metrology software, he observed that the software needed data from all sides of the tube - and it took too much time to scan a simple tube. (This is something never required by VTube-LASER). No general software has a huge database of benders to which it can connect for bender corrections like VTube-LASER. (This is a major strength of VTube-LASER.) | For example, one customer told us that, when scanning tube shapes with general metrology software, he observed that the software needed data from all sides of the tube - and it took too much time to scan a simple tube. (This is something never required by VTube-LASER). No general software has a huge database of benders to which it can connect for bender corrections like VTube-LASER. (This is a major strength of VTube-LASER.) |
Revision as of 15:12, 21 June 2022
Contents |
Question
Can VTube-LASER measure the entire tube, including the bend profeils, like its competition?
Answer
Yes, it can measure the entire tube - including bend profiles. However, it, by default, prioritize straights over the bends for a reason.
Why VTube-LASER Prioritizes Straights
VTube-LASER, by default, encourages the scanning of straights alone (not bends) in order to get to the shape qualification as quickly as possible. Because it uses LASER scan data, it can also scan bend profiles to give the total collapse on the outside of the bend. This is a secondary operation. This is a secondary operation so that users can choose to scan or not to scan the bend profiles.
An Answer For The Marketing Claims of Our Competition
We have been told that the marketers of one competing software package claim that its method of scanning the entire tube is better than the VTube-LASER segmented method. However, we and hundreds of our customers disagree with this claim. Our opinion is that the continuous scanning method is a disadvantage in ease-of-use and speed and productivity. VTube-LASER scans only what is necessary to get the job done quickly for shape qualification. There is no gain in scanning more data than one needs to qualify the tube shape.
This makes VTube-LASER both easier and faster. One European OEM bender manufacturer experienced with both VTube-LASER and the competing software told us that he always chooses VTube-LASER over the other software package because it is much easier and faster to use.
What About VTube-LASER Compared to Generic Metrology Software?
Other generic metrology software, like CAM2 from FARO or Polyworks from Innovmetric, can scan tubing too - but the process is much more complicated than in VTube-LASER.
For example, one customer told us that, when scanning tube shapes with general metrology software, he observed that the software needed data from all sides of the tube - and it took too much time to scan a simple tube. (This is something never required by VTube-LASER). No general software has a huge database of benders to which it can connect for bender corrections like VTube-LASER. (This is a major strength of VTube-LASER.)