Difference between revisions of "VTube-LASER ROMER RDS Performance Recommendations"
(→Recommended RDS Control Panel Setup) |
(→Recommended RDS Computer IP Setup) |
||
Line 76: | Line 76: | ||
</td> | </td> | ||
<td> | <td> | ||
− | [[image:RDS | + | [[image:RDS Computer IP Address.png|700px]]<br><br> |
− | + | ||
</td> | </td> | ||
Line 96: | Line 95: | ||
</tr> | </tr> | ||
</table> | </table> | ||
− | |||
==Recommended RDS Control Panel Setup== | ==Recommended RDS Control Panel Setup== |
Revision as of 16:22, 18 July 2018
Information about RDS performance with VTube-LASER
|
See also RDS Versions for ROMER Scanners
About ROMER RDS
ROMER RDS is a driver system that connects software like VTube-LASER to any ROMER arm that uses the RDS driver. See this page for details all the different arms that RDS can connect VTube-LASER to: |
RDS Performance Notes
When idling, the RDS service requires only 1 to 5 percent of the CPU usage. |
You can watch the CPU usage in the Windows Task Manager. |
Recommended RDS Computer IP Setup
The ROMER scanners communicate with the computer through an TCPIP connection (standard network). The arm uses a USB cable connection. This means that ROMER requires two cables per arm with scanners. |
We recommend that you turn the ROMER sound off in General parameters. |
Recommended RDS Control Panel Setup
This is how we recommend that you setup the RSx menu in the RDS Control Panel for VTube-LASER.
|
We recommend that you turn the ROMER sound off in General parameters. |
ROMER Ball Probe Support
All ball probe systems on devices that run through RDS are compatible with VTube-LASER. (VTube-LASER can use the LASER or the ball probe.) |
ROMER Versions
RDS 4.2.1 and 4.2.2 work well. v4.2.2 and newer has anti-outlier (anti-flyer) algorithms for highly reflective surfaces. |
How to Determine Your Current RDS Version
Left click on the System Tray icon. |
|
Right click on the measuring center icon. |
|
Left click on About. |
|
The RDS About window will display. |
Other Pages
- Back to VTube-LASER