Difference between revisions of "VTube-STEP v2.9.10"

From ATTWiki
Jump to: navigation, search
(Created page with "<table> <tr cellpadding=10> <td width=225> 300px ==Revision 2.9.10== Release Date: July 4, 2018<br> Build: 12 * Back to VTube-STEP * Back...")
 
(25pxNEW - VTUBE-STEP MODE AUTOMATIC NEGATIVE STRAIGHT FIX DURING PARAMETRIC REBUILD)
Line 23: Line 23:
 
__TOC__
 
__TOC__
  
==[[image:Check.jpg|25px]]NEW - VTUBE-STEP MODE AUTOMATIC NEGATIVE STRAIGHT FIX DURING PARAMETRIC REBUILD==
+
==[[image:Check.jpg|25px]]NEW - HERBER Bender Setup From Solid Model Through a Network (VTube-LASER or VTube-STEP)==
  
 
<table cellpadding=10 width=900>
 
<table cellpadding=10 width=900>
Line 30: Line 30:
 
<td width=400>
 
<td width=400>
  
(Note: VTube-STEP is included in the VTube-LASER license. It is used for importing model data.)<br><br>
+
We added the HERBER SOL file protocol that allows VTube-LASER to send NEW data to the HERBER benders through a network connection.
 
+
<br><br>
Models with a 180-degree or greater bend angles can often create a very small negative straight distance value. We've added this feature to allow you to detect and fix this situation automatically by injecting a value of zero where there are negative straights.<br><br>
+
 
+
Pressing YES will change the shape of the part.  However, if the negative straight is very small, then changing the shape will have no significance and will create a part that is close enough to the nominal to still be a good shape for use as MASTER data.<br><br>
+
 
+
This feature also allows you to skip the fix by pressing "NO." If you do this, then you can still manually adjust the radii to smaller values after the rebuild. Of course, if you skip this fix, then VTube may have trouble generating the diameter - and may even generate and display a program error that you can usually bypass.<br><br>
+
  
 +
[[image:HerberSplash.png|200px]]<br><br>
 +
Use this new feature to import solid models into HERBER bender controls.<br><br>
 +
<b>Bender setup for the HERBER works through either VTube-LASER or VTube-STEP</b>
 
</td>
 
</td>
  
 
<td>
 
<td>
  
[[image:vts_v2.9.9_automatic_negative_straight_fix_at_rebuild.png|600px]]<br><br>
+
 
 +
[[image:vtl_v2.9.10_herber_sol_output.png|600px]]
 
</td>
 
</td>
 
</tr>
 
</tr>
Line 48: Line 47:
 
</table>
 
</table>
 
<br><br>
 
<br><br>
 
  
 
==[[image:Check.jpg|25px]]FIX- VTUBE-STEP MODE COLLECTION FEATURE SELECTION ISSUE==
 
==[[image:Check.jpg|25px]]FIX- VTUBE-STEP MODE COLLECTION FEATURE SELECTION ISSUE==

Revision as of 03:06, 5 July 2018

Vtube-step logo 2.png

Revision 2.9.10

Release Date: July 4, 2018
Build: 12


Vtube-step v2.9 mainscreen headerassembly purple.png



Contents


Check.jpgNEW - HERBER Bender Setup From Solid Model Through a Network (VTube-LASER or VTube-STEP)

We added the HERBER SOL file protocol that allows VTube-LASER to send NEW data to the HERBER benders through a network connection.

HerberSplash.png

Use this new feature to import solid models into HERBER bender controls.

Bender setup for the HERBER works through either VTube-LASER or VTube-STEP


Vtl v2.9.10 herber sol output.png



Check.jpgFIX- VTUBE-STEP MODE COLLECTION FEATURE SELECTION ISSUE

(Note: VTube-STEP is included in the VTube-LASER license. It is used for importing model data.)

We found issues with the collected objects in VTube-STEP mode.

  • For example, the selected collected object (see the orange object) would never delete from the screen - even if the operator selected it and pressed delete.

  • This issue could cause index errors in the Collection Features list memory displayed in the grid.

  • The Collection Features Grid would not update automatically after a delete of the models on the screen.

All of these issues have been fixed.

Vvts 2.9.9 collected object selection.png



Other Pages