Difference between revisions of "VTube-LASER v2.8.5"

From ATTWiki
Jump to: navigation, search
(25px BUILD 1 - IMPROVED: REMOVED "Move Arm from Cradle" MESSAGE)
(25px BUILD 1 - REMOVED "Move Arm from Cradle" MESSAGE)
Line 60: Line 60:
 
<td width=300>
 
<td width=300>
 
This message appeared when loading VTube-LASER projects on older arms. This message is no longer displayed because it is not needed with then newer FARO drivers.
 
This message appeared when loading VTube-LASER projects on older arms. This message is no longer displayed because it is not needed with then newer FARO drivers.
 +
<td>
 +
 +
</td>
 +
<td>
 +
</tr>
 +
</table>
 +
 +
 +
==[[image:Check.jpg|25px]] BUILD 1 - CTRL-S SAVES THE PROJECT THEN BRINGS LASER WINDOW TO THE FRONT==
 +
 +
<table cellpadding=10 width=900>
 +
<tr valign=top>
 +
<td width=300>
 +
This fixes an issue where the Ctrl-S would bring the STEP mode window to the foreground when saving VTube-LASER projects. Now the VTube-LASER window moves back to the top after the save.
 
<td>
 
<td>
  

Revision as of 22:11, 26 July 2017

Vtube-laser logo 1.96.png


Revision 2.8.5

Original Release Date: July 26, 2017
Latest Build: 1


Vtube-laser v2.7 screenshot.png

Contents


Check.jpg BUILD 1 - NEW: IMPORT ONLY MASTER DATA FROM VTP FILES

You can now import the MASTER tube data from VTP - VTube Project files.

This allows for the import of older VTube-LASER project files without changing the measuring center setup for newer versions of VTube-LASER.

The data imported is PART SETUP and MASTER TUBE.

Vtube-laser v2.8.5 importVTPmaster.png

Check.jpg Build 1 - NEW: SEARCH AND MOVE IN PATH MANAGER

VTube now lets you search for path names in the Path Manager.

It also allows you to move the paths up or down in the lost.

Vtube-step 2.8.4 pathmanager search.png



Check.jpg BUILD 1 - REMOVED "Move Arm from Cradle" MESSAGE

This message appeared when loading VTube-LASER projects on older arms. This message is no longer displayed because it is not needed with then newer FARO drivers.


Check.jpg BUILD 1 - CTRL-S SAVES THE PROJECT THEN BRINGS LASER WINDOW TO THE FRONT

This fixes an issue where the Ctrl-S would bring the STEP mode window to the foreground when saving VTube-LASER projects. Now the VTube-LASER window moves back to the top after the save.

Other Pages