Difference between revisions of "Recommended VTube-LASER Laser Scanner Settings"
From ATTWiki
(→Ideal Setup for the HD Version 6 Scanner in VTube-LASER) |
(→STEP 2) |
||
Line 37: | Line 37: | ||
===STEP 2=== | ===STEP 2=== | ||
'''Set the Scan Rate to 1/1.'''<br> | '''Set the Scan Rate to 1/1.'''<br> | ||
− | * This value will allow the laser stripes to come into VTube-LASER as quickly as the driver can send them.<br><br> | + | * This value will allow the laser stripes to come into VTube-LASER as quickly as the FARO driver can send them.<br><br> |
'''Set the Scan Density to 1/16'''<br><br> | '''Set the Scan Density to 1/16'''<br><br> |
Revision as of 19:43, 25 December 2015
|
Ideal Setup for the HD Version 6 Scanner in VTube-LASER
The HD blue line scanner has significantly increased capabilities that cause us to revise recommendations in FARO scanner setup when compared to earlier scanners. These settings work very well in VTube-LASER with the HD scanner.
VTube-LASER be connected to a FARO arm to perform these steps.
STEP 1In VTube-LASER window click on Scanner Algorithm label above the viewport window. |
|
STEP 2Set the Scan Rate to 1/1.
Set the Scan Density to 1/16
|
|
STEP 3For most materials set the Algorithm to Automatic - Normal. |
|
STEP 4Uncheck the Reflection Filter option.
|
|
STEP 5Click on the OK button to exit the menu. |
Other Pages
- Back to the VTube-LASER page