Difference between revisions of "VTube Communication with YLM Benders"
(→Shutdown to Edit the Windows Setup) |
(→Shutdown to Edit the Windows Setup) |
||
Line 159: | Line 159: | ||
# Type "12345" and OK in the numeric keypad.<br><br> | # Type "12345" and OK in the numeric keypad.<br><br> | ||
# YLM will close without shutting down the computer. | # YLM will close without shutting down the computer. | ||
+ | |||
+ | |||
+ | <br><br><br><br> | ||
==Other Pages== | ==Other Pages== | ||
* See [[VTube-LASER]] | * See [[VTube-LASER]] | ||
* See [[VTube-STEP]] | * See [[VTube-STEP]] |
Revision as of 13:53, 26 September 2014
|
Contents |
YLM Control software
The YLM Windows software allows for complete programming of bender setup. |
VTube-STEP and VTube-LASER Support for YLM Benders
VTube-STEP can export Supravision data to YLM benders. |
Using VTube-LASER to send NEW MASTER Data to YLM Benders
The connection the bender is made with standard network connection, and a shared folder location between the VTube computer and the operator station computer. For a NEW TUBE, the YLM takes in VTube MASTER Supravision LRA data in a Supravision file.
|
Follow these steps at VTube-LASER to Send a NEW TUBE SETUP to a YLM Bender
STEP 1 |
Follow these steps at the YLM CONTROL to import the MASTER data from VTube-LASER
VTube-LASER CORRECTION Steps for YLM Benders
The connection the bender is made with standard network connection, and a shared folder location between the VTube computer and the operator station computer.
|
Follow these steps at VTube-LASER to Correct a YLM Bender
STEP 1 |
Follow these steps at the YLM CONTROL to import the measured data from VTube-LASER
Shutdown to Edit the Windows Setup
To shutdown the YLM software to configure Windows settings:
- Press the Shutdown button.
- Press "NO" for shutdown.
- Type "12345" and OK in the numeric keypad.
- YLM will close without shutting down the computer.
Other Pages
- See VTube-LASER
- See VTube-STEP