Difference between revisions of "CNC Bender v12.4"

From ATTWiki
Jump to: navigation, search
(25px ENHANCED: Direct Axes Jog Button and Image)
(25px ENHANCED: Extended Timing Control for Servo Modules)
Line 43: Line 43:
 
<tr>
 
<tr>
 
<td width=400>
 
<td width=400>
The SMT operator stations now process data more quickly than in earlier modules.  This version of CNC Processor now more carefully governs the timing of all data sent to the servo modules.
+
The SMT operator stations now process data more quickly than in earlier modules.  This version of CNC Processor now more carefully governs the timing of all data sent to the servo modules to prevent occasional TCP/IP errors due to CNC Bender outpacing the servo modules.
 
<br><br>
 
<br><br>
 
</td>
 
</td>

Revision as of 16:24, 5 October 2013

v12.4 - October 7, 2013

Cncv12procontrol withteachmode.jpg


Check.jpg ENHANCED: Benderlink

  • DOCS software may send a changed rotation direction which could crash a bender during correction. CNC Bender Benderlink intercepts this condition and automatically corrects the direction if rotatio data is already programmed into the control. The problem especially occurs around the 180 degree rotation area.


  • The Compare Data tab is now the first one to display when entering Benderlink from Tube Shape.

Cncbender benderlinkscreen.png



Check.jpg ENHANCED: Extended Timing Control for Servo Modules

The SMT operator stations now process data more quickly than in earlier modules. This version of CNC Processor now more carefully governs the timing of all data sent to the servo modules to prevent occasional TCP/IP errors due to CNC Bender outpacing the servo modules.

Momentum.jpg



Check.jpg Other Changes

  • Repaired form repaint issue in the Low Level menu.



Other Pages