Difference between revisions of "VTube-LASER v1.83"

Revision 1.83

• Back to VTube-STEP
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER

Function keys now allow you to quickly refresh or resize the graphic image in the viewport.

• F1: Show Help
• F2: Refresh Graphics
• F3: Zoom All
• F4: VPort: Select Mode
• F5: VPort: Orbit Mode
• F6: VPort: Pan Mode
• F7: VPort: Zoom Window Mode
• F8: Tube: End Point Labels
• F9: Tube: Intersection Point Labels
• F12: Delete selected objects

This new menu is activated by pressing on the SolidWorks Builder option in the right Model menu. The menu gives operators choices for how to build the part in SolidWorks. For example:

• Build rectangular or cylindrical parts.
  
  
• Build with or without the intersection points in the 3DSketch.
  
  

The part shapes can be based on the MASTER, MEASURED, or ALIGNED.

The screen image below shows a SolidWorks assembly of the MASTER part an ALIGNED part drawn as individual parts automatically by VTube. The MASTER tube is blue. The measured aligned tube is brown.

The side panels in both STEP and LASER modes are collapsible.

To expand the menus, simply move the mouse over the collapsed side bars.

The right menu is completely redesigned to allow for resizing with different font sizes. The buttons are now grid-based - which allows them to redize quickly based on the font sizes.



The font sizes can be adjusted in the System Option/User Interface menu:

Click on the FARO arm image to connect to the FARO.

The new Close button allows you to close VTube more quickly than before.

The new Save As button allows you to save the current part as a new part file.

This free-form editor allows you to enter comments 1 and 2 as notes with empty rows using the Enter button.

You can even load and save external text files to and from the Comment fields.

Bender Setup now shows the most recent event times for the project in memory.

This includes the time of the most recent recall from the bender, the time of the most recent send to the bender, and the time of the most recent adjustment data calculation.



This date/time data is stored with the project file. Each project will have different communications times. The date/times are loaded with the project files.

VTube shows "[Waiting for first RECALL]" or "[Waiting for first SEND]" before communications occurs the first time for a project.

The side menu widths can be set to default to NARROW, MEDIUM, or WIDE in the System Option menu.

The Supravision export would use the A-End and B-End Solid Model Offset for the Supravision end offsets in the exported Supravision file. The values that should be used are the A-End and B-End Length Adjust - because that is the equivalent for Supravision end offsets.

This has been repaired in this version.

The aligned coordinates now have a grid in a tab menu inside the Inspection Data menu.

VTube now includes a TubeCalc Elongation Converter that can be accessed from the Part Setup popup menu. This converter calculates VTube elongation percentages from TubeCalc elongation per degree values.

The new chart shows absolute LENGTHS and ROTATIONS appropriate for Conrac style benders.

This chart always uses arc lengths that are compensated for elongation based on the elongation percentage in the part setup menu.

• VTube now saves the current project state in the logs folder in file "vtube_prealignment_project_state.vtp" before every alignment starts. If the file already exists, it is overwritten with a newer file.
  
  

• This is to help diagnose alignment issues that may arise. If you experience a failure during alignment, then you can send the "C:\Users\Public\VTube\vtube_prealignment_project_state.vtp" file to Advanced Tubular for analysis.
  
  

VTube Bender Setup can re-establish the last adjusted values calculated during alignment with this new copy feature - even if you've cleared them in the Bender Setup menu.

• VTube now always reports reduced arc lengths compensated for elongation if the elongation percentage is greater than 0. (It used to always report the theoretical value without elongation.)
  
  
• The model refresh time is optimized significantly - especially when the point labels are switched on.
  
  
• Comments are no longer displayed in a dialog at project load time.
  
  
• The envelope colors now display properly in the Inspection / Envelope menu immediately after they are set.
  
  
• VTube no longer refreshes the tube model on the screen when a project is saved. This saves significant amount of time for large models.
  
  
• Repairs were made to the Language Editor.
  
  
• Point label redraw repairs were made.
  
  
• Internal were made repairs to the Part Setup grid. Corrections were made to field types.
  
  
• Click on column cell 1 of the Default Radius field to show the Radius Table.