Difference between revisions of "VTube-LASER v1.81.4"

Revision 1.81.4

• Back to VTube-STEP
• Back to VTube Software Updates (for LASER Mode)
• Back to VTube-LASER

• The new graphic point labels display on the tube model.
  
  
• They show the end labels and the intersection point labels in balloons that surround the part.
  
  
• The graphics labels are now included in reports.
  
  
• The label fonts can be controlled in the new Parametric Tube control window.

• Right click to copy the current image to the Windows clipboard.
  
  
• Paste the bitmap into any Windows program that can accept bitmap images.
  
  

• Select a datum point in the datum grid with the new point selector by clicking on the Datum grid.
  
  
• The datum is used for reporting distances from the selected datum to other points when the part is aligned to the master.
  
  

• The Parametric Tube controls are removed from the Entity window and placed in a new Parametric Tube control window.
  
  
• New controls were added: model smoothness, point label font control, point scale
  
  

• This feature grid editing to be locked or unlocked.
  
  
• Locking the grid allows you to make select multiple cells for copying the data to clipboard, or pasting data into the grids from the clipboard.
  
  

• This is a small green arrow above the XYZ grids that allows you to use the previous value by clicking on the green down-arrow.
  
  

• New popup-menu controls allow you to copy grid values to the clipboard.
  
  
• You can copy in standard tab separated data, or in HTML format.
  
  
• Sample HTML paste from clipboard of demo part 2:

• Data that is pasted into VTube should be tab-delimited (values separated by tab characters)

• The Bender Setup menu uses a new collapsible-style office menu on the right side for extra room for new commands.
  
  
• Bender Setup can now send Blue Column data to the bender + FULL springback compensation for first-time setup.
  
  

• VTube now stores the orientation of the tube model in the viewport in the project file.
  
  
• Supravision bender output did not include the last radius value in the Supravision file. This is repaired.
  
  
• Multiple presses of the "Copy Master LRA" button in the Bender Setup menu no longer increases the blue column data be the adjustment data.
  
  
• When saving output to the Winton ECNC4 format, the filename is now automatically set to the current part name.
  
  
• When creating a PDF file, the word "VTube-" is no longer inserted at the beginning of the filename. The filename is made up of the part number alone (appended with PDF).
  
  
• The "Custom" point setting is no longer allowed in the Point Alignment Selection window, since the alignment points must be based on points along the MASTER and MEASURED centerline points along the tube.