Difference between revisions of "BendPro"

From ATTWiki
Jump to: navigation, search
(How to Check if Communications is Possible)
Line 24: Line 24:
 
===How to Check if Communications is Possible===
 
===How to Check if Communications is Possible===
  
The Supravision link is sold by [[PINES]] as an option.  It's important to verify that this option is switched on when discovering if a TS-2000 is ready for communication.  The main window contains 16 touchscreen buttons starting with XYZ in the upper left.  If the upper-right button reads "[[Supravision]] Link", then the option is enabled on that TS-2000 control.  If the button says "External Link", then communications is not activated.
+
====G2 Version====
 +
 
 +
<table>
 +
<td valign=top>
 +
<td width=250>
 +
The Supravision link is sold by [[Current Tech]] as an option.  It's important to verify that this option is switched on when discovering if a BendPro G2 is ready for communication.  Click on the Utilities pulldown menu, then click on the Measuring Machine Interface option.
 +
</td>
 +
<td>
 +
[[image:bendpro-g2-utilities-menu.jpg|300px]]
 +
</td>
 +
</tr>
 +
</table>
  
 
===What Pines Technology will Need to Activate the Communications Feature===
 
===What Pines Technology will Need to Activate the Communications Feature===

Revision as of 17:11, 20 March 2013

BendPro-G2.jpg

Contents


BendPro is a popular bender software package used by multiple bender OEMs in the industry.

This is a BendPro G2 control on a Horn bender.

Bendpro-horn.jpg


About BendPro Measuring Center Communications

BendPro uses Supravision Network communications as a standard for communications. Communications are straight-forward, efficient, and very fast.

The BendPro can be setup to communicate with:


How to Check if Communications is Possible

G2 Version

</tr>

The Supravision link is sold by Current Tech as an option. It's important to verify that this option is switched on when discovering if a BendPro G2 is ready for communication. Click on the Utilities pulldown menu, then click on the Measuring Machine Interface option.

Bendpro-g2-utilities-menu.jpg

What Pines Technology will Need to Activate the Communications Feature

Pines Technology will need to send you a setup program to enable communications. They will ask for this information:

  1. Machine Serial Number
  2. Software Version Number

You can find both of these values in the caption of the TS-2000 software. The software version will be a four digit number like 2.8.6.7 or 3.1.0.2.


Other