Difference between revisions of "BendPro"

Revision as of 17:05, 20 March 2013

BendPro is a popular bender software package used by multiple bender OEMs in the industry.

About BendPro Measuring Center Communications

BendPro uses Supravision Network communications as a standard for communications. Communications are straight-forward, efficient, and very fast.

The BendPro can be setup to communicate with:

• FARO ScanArms running our VTube-LASER software
• FARO arms using FARO CAM2 software using our Benderlink for FARO software

How to Check if Communications is Possible

The Supravision link is sold by PINES as an option. It's important to verify that this option is switched on when discovering if a TS-2000 is ready for communication. The main window contains 16 touchscreen buttons starting with XYZ in the upper left. If the upper-right button reads "Supravision Link", then the option is enabled on that TS-2000 control. If the button says "External Link", then communications is not activated.

What Pines Technology will Need to Activate the Communications Feature

Pines Technology will need to send you a setup program to enable communications. They will ask for this information:

1. Machine Serial Number
2. Software Version Number

You can find both of these values in the caption of the TS-2000 software. The software version will be a four digit number like 2.8.6.7 or 3.1.0.2.

Other

• See also VTube-LASER
• See also Benderlink for FARO