Difference between revisions of "VTube-LASER v1.77.4"
(One intermediate revision by one user not shown) | |||
Line 80: | Line 80: | ||
Now in Best Fit - Automatic End Weighting alignment, as the deviations between MASTER and MEASURED data shrink - so do the number of iterations that VTube will take to align the measured tube. Tube shapes that are well within tolerance will align faster with Automatic End Weighting than tubes that are out of tolerance.<br><br> | Now in Best Fit - Automatic End Weighting alignment, as the deviations between MASTER and MEASURED data shrink - so do the number of iterations that VTube will take to align the measured tube. Tube shapes that are well within tolerance will align faster with Automatic End Weighting than tubes that are out of tolerance.<br><br> | ||
− | To allow VTube to accelerate alignments for tubes that are well within tolerance VTube now allows you to choose the Deviation to Tolerance ratio in the Best Fit grid in order to help the Best Fit engine to know what deviation range you consider good enough for a solution | + | To allow VTube to accelerate alignments for tubes that are well within tolerance VTube now allows you to choose the Deviation to Tolerance ratio in the Best Fit grid in order to help the Best Fit engine to know what deviation range you consider good enough for a solution.<br> |
[[image:vtube_1.77.4_bestfitautoweight_closeup.jpg|400px]]<br> | [[image:vtube_1.77.4_bestfitautoweight_closeup.jpg|400px]]<br> | ||
[[image:vtube_1.77.4_bestfitautoweight.jpg|450px]]<br><br> | [[image:vtube_1.77.4_bestfitautoweight.jpg|450px]]<br><br> | ||
− | The ratio can be set from 0 to 1 as a floating point. If you set the value to 0.5, then the Best Fit engine will consider any deviation that is 50% of the tolerance to be good enough | + | The ratio can be set from 0 to 1 as a floating point. If you set the value to 0.5, then the Best Fit engine will consider any deviation that is 50% of the tolerance to be good enough to be considered a good solution for the best alignment orientation. |
Other examples: | Other examples: |
Latest revision as of 03:00, 15 August 2012
Revision 1.77.4
|
NEW: Pulldown Menus
|
NEW: Recent Project List in the Pulldown Menus
Recent Projects can be reloaded with one click from the File pulldown menu. |
NEW: Real "Save" Command Distinct from "Save As..."
VTube now allows you to save the current project without having to supply the current filename again. Hit the blue disk, and VTube will save the data without any interruption. |
ENHANCED: Best Fit - Automatic Weighting Algorithm Logic Redesigned
The Best Fit Automatic Weighting alignment type logic was redesigned to follow better logic for finding the best end-weights automatically. |
NEW: Best Fit - Deviation to Tolerance Ratio and Accelerated Alignment
ENHANCED: Better Feed Back Progress during Best Fit - Automatic Weighting
NEW: Hardware Key Information Window
The new hardware key window will show the details of your license found in the hardware key that enables VTube to run. The command to display the window is inside the new Help pulldown menu. |
NEW: Close VTube from LASER Mode
You can now close VTube from the LASER mode. |
NEW: Low Level User Interface Value: Maximum Recent Files
Use this to control how many files display in the Recent Project list in the pulldown menu. The default is 10 files. |
ENHANCED: Allow the Drawing of ZERO Value Radii
VTube can now draw a zero-radius bend in the model with displaying an error. |
Other Pages
- Back to the VTube-LASER page