CNC Bender v11-20080915

From ATTWiki
(Redirected from CNC Bender v11-20080912)
Jump to: navigation, search

Cncbender pda rvg long logo.jpg

Operatorstation model.jpg




Check.jpg New Pressure Die Assist GEARING

Cncbender perfect pda gearing logo.jpg

PDA Gearing

Pressure Die Assist Gearing (see PDA Gearing) is now available as of this version. Motion-controlled PDA is geared to follow every acceleration and deceleration of the bend axis.



Check.jpg NEW - Pressure Die Assist RVG = Real-Time Variable Gearing

Cncbender pda rvg icon large.jpg

Welcome to RVG POWER!

Take advantage of the power of a motion-controlled Pressure Die Assist cylinder by using our Real-time Variable Gearing, or RVG feature. It is a feature that allows you to setup the Pressure Die Assist motion to adjust its motion relative to the bend axis in real time.

  • Up to 20 "adjust points" can be set per RVG profile.
  • Each bend can have a unique profile.
  • All RVG Profiles are available for all parts on the bender in a convenient list.



Check.jpg NEW - PDA-RVG Profile Editor

[[image:Cncbender_pda_RVG_profile_editor.jpg|600px]]

The new RVG Profile editor allows you to edit an unlimited number of profiles. Each profile controls the gearing between the bend arm and the pressure assist.



Check.jpg NEW - PDA-RVG Profile Editor

[[image:Cncbender_pda_RVG_adjustpoint_editor.jpg|400px]]

The new RVG Profile ADJUST POINT editor allows you to edit a single value in an RVG Profile row. Adjust points are angles where the gearing "adjusts" to a new value.




Check.jpg NEW - UNLIMITED AXIS EXPANSION

The SERVO Manual Control page has been completely redesigned to allow for ANY NUMBER OF AXES. The page can grow or shrink automatically depending on the bender setup.

Initial tests from our technicians indicate that this page is a significant improvement in ease of use over the previous page.

Cncbender manual servo page v11-20080915.jpg
The page also has new features: Every axis can be sent to either 1 pre-programmed relative location, or 2 pre-programmed absolute locations.


Read our concept and direction for Axis Expansion for CNC Bender.



Check.jpg NEW - TOOLBOX PAGE FOR STORING OPTIONS WHEN NOT BEING USED


CNC Bender now allows operators to put their options away - just like tools in a tool box. See CNC Bender Toolbox for details.

The feature is called "Toolbox" and is available for every Dynamic Options List in CNC Bender.

A new Toolbox icon is in every dynamic options page:

Cncbender updated options v11-20080915.jpg



The action of putting an option away is as simple moving the option from one list to another using move buttons. When you need them again, they will still be in the box - already set with the value that you used last when transferring them to the toolbox.
Cncbender options toolbox v11-20080915.jpg




Check.jpg NEW - REDESIGNED MANUAL TEST BEND PAGE

The page has bigger buttons and a new Real-time Variable Gearing Profile selection. That means you can use Real-time Variable Gearing in the Test Bend page! You can even edit the Profile before running a test bend.

Cncbender manual testbend page v11-20080915.jpg




Check.jpg NEW - LOAD PART BUTTON IN THE FRB MENU

A new LOAD button has been inserted into the FRB page. This saves from navigating through several other screens in order to load data into the FRB menu.

Cncbender partload infrb v11-20080915.jpg




Check.jpg Other Changes

  • Now control the home offset of any axis on a user-configurable process lists with the "Home Offset" parameter called "HOF". It is no longer necessary to use low-level software to adjust the offset.
  • New Axis Speed grid that can expand to any number of axes in the low level menu.

Cncbender updated axis speeds v11-20080915.jpg

  • A new Low Level option allows you to switch the voice messages off in either CNC Processor or CNC Bender or both.



Other Pages