VTube NUMALLIANCE Bender Correction

From ATTWiki
Revision as of 15:09, 15 July 2019 by Mcone (Talk | contribs)

Jump to: navigation, search

VTube-LASER AssemblyOverModel.png RightOrangeArrow.png Numalliance Splash.png

This page describes how to use VTube-LASER to correct NUMALLIANCE benders.

Back to VTube-LASER

Contents


NUMALLIANCE CORRECTIONS

VTube-LASER has an export option for NUMALLIANCE CSV files that is used to correct the NUMALLIANCE benders.

Note: NUMALLIANCE benders only require the measured data for corrections.

Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.

NumallianceCorrectionsSlide1.png




STEP 1

VTube-LASER has an export option for NUMALLIANCE CSV files that is used to correct the NUMALLIANCE benders.

Note: NUMALLIANCE benders only require the measured data for corrections.

Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.

VTube-LASER Correcting a NUMALLIANCE Bender.png



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube_NUMALLIANCE_Bender_Correction&oldid=40119"