VTube NUMALLIANCE Bender Correction

From ATTWiki
Revision as of 17:52, 11 July 2019 by Mcone (Talk | contribs)

Jump to: navigation, search

Numalliance Splash.png

This page describes the use of the VTube-LASER to NUMALLIANCE bender corrections.



Back to VTube-LASER

Contents


NUMALLIANCE CORRECTIONS

VTube-LASER now has an export option for NUMALLIANCE CSV files that is used to correct the NUMALLIANCE benders.

Note: NUMALLIANCE benders only require the measured data for corrections.

Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.

VTube-LASER Correcting a NUMALLIANCE Bender.png



Other Pages