Difference between revisions of "VTube NUMALLIANCE Bender Correction"

From ATTWiki
Jump to: navigation, search
(NUMALLIANCE CORRECTIONS)
(STEP 1)
Line 46: Line 46:
  
 
<td width=300>
 
<td width=300>
VTube-LASER has an export option for NUMALLIANCE CSV files that is used to '''correct''' the NUMALLIANCE benders.<br><br>
+
Click on the "Measured Tube" button in the navigation pane.
Note: NUMALLIANCE benders only require the ''measured'' data for corrections.<br><br>
+
Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.
+
  
 
</td>
 
</td>
  
 
<td>
 
<td>
[[image:VTube-LASER Correcting a NUMALLIANCE Bender.png|800px]]
+
[[image:NumallianceCorrectionSlid2.png|800px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 15:11, 15 July 2019

VTube-LASER AssemblyOverModel.png RightOrangeArrow.png Numalliance Splash.png

This page describes how to use VTube-LASER to correct NUMALLIANCE benders.



Back to VTube-LASER

Contents


NUMALLIANCE CORRECTIONS

VTube-LASER has an export option for NUMALLIANCE CSV files that is used to correct the NUMALLIANCE benders.

Note: NUMALLIANCE benders only require the measured data for corrections.

Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.

NumallianceCorrectionsSlide1.png




STEP 1

Click on the "Measured Tube" button in the navigation pane.

NumallianceCorrectionSlid2.png



Other Pages