Difference between revisions of "VTube NUMALLIANCE Bender Correction"

From ATTWiki
Jump to: navigation, search
(NUMALLIANCE CORRECTIONS)
Line 19: Line 19:
  
 
==NUMALLIANCE CORRECTIONS==
 
==NUMALLIANCE CORRECTIONS==
 +
 +
<table cellpadding=10 width=1200>
 +
<tr valign=top>
 +
 +
<td width=300>
 +
VTube-LASER has an export option for NUMALLIANCE CSV files that is used to '''correct''' the NUMALLIANCE benders.<br><br>
 +
Note: NUMALLIANCE benders only require the ''measured'' data for corrections.<br><br>
 +
Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.
 +
 +
</td>
 +
 +
<td>
 +
[[image:NumallianceCorrectionsSlide1.png|800px]]
 +
</td>
 +
</tr>
 +
 +
</table>
 +
<br><br>
 +
 +
 +
 +
==STEP 1==
  
 
<table cellpadding=10 width=1200>
 
<table cellpadding=10 width=1200>

Revision as of 15:09, 15 July 2019

VTube-LASER AssemblyOverModel.png RightOrangeArrow.png Numalliance Splash.png

This page describes how to use VTube-LASER to correct NUMALLIANCE benders.



Back to VTube-LASER

Contents


NUMALLIANCE CORRECTIONS

VTube-LASER has an export option for NUMALLIANCE CSV files that is used to correct the NUMALLIANCE benders.

Note: NUMALLIANCE benders only require the measured data for corrections.

Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.

NumallianceCorrectionsSlide1.png




STEP 1

VTube-LASER has an export option for NUMALLIANCE CSV files that is used to correct the NUMALLIANCE benders.

Note: NUMALLIANCE benders only require the measured data for corrections.

Measure the tube in VTube-LASER, then send the MEASURED tube data to the bender control, and it will then perform the correction.

VTube-LASER Correcting a NUMALLIANCE Bender.png



Other Pages