VTube End Length Offsets

From ATTWiki
Revision as of 02:05, 24 April 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg
Vtube-step logo.jpg

Vtube-laser 1.77.3.jpg


Contents


How End Offsets Work in VTube

End Offsets Add or Subtract Material Length

The end offsets in the Part Setup menu control the end lengths in real-time.

This is the starting tube with no A End or B End offsets.

Vtube-offsetdemo nooffset.png

Entering Offsets in the Part Setup Menu

We can change the B End Offset in the Part Setup menu like this:

Vtube-offsetdemo offset b end 3inches.png

Then we press F2 to refresh the graphics, and B end is made longer - without moving the end point.

Vtube-offsetdemo offset b end 3inches model1.png

Using Transparency to Show the Effect

Here is the result with transparency increased to 0.75:

Vtube-offsetdemo offset b end 3inches model2.png

Other Pages