Difference between revisions of "VTube Communication with YLM Benders"

From ATTWiki
Jump to: navigation, search
(VTube-LASER Correction Steps for YLM Benders)
(VTube-LASER Correction Steps for YLM Benders)
Line 44: Line 44:
 
The YLM uniquely takes in VTube measured Supravision LRA data.  To make a correction to a YLM bender, it is important to send only this data.  The standard correction process will not work with the YLM.<br><br>
 
The YLM uniquely takes in VTube measured Supravision LRA data.  To make a correction to a YLM bender, it is important to send only this data.  The standard correction process will not work with the YLM.<br><br>
  
====Follow these steps to import the measured data from VTube-LASER:====<br><br>
+
===Follow these steps to import the measured data from VTube-LASER:===<br><br>
 
* Select the file to import.  It will have a $$$ filename extension.<br><br>
 
* Select the file to import.  It will have a $$$ filename extension.<br><br>
 
* Press the Compare button to compare the measured data with the existing data.<br><br>
 
* Press the Compare button to compare the measured data with the existing data.<br><br>

Revision as of 17:58, 26 June 2013

YLMcncbender.jpg

YLM (Yin Lin Machine Industrial Co.) benders are built in Taiwan and distributed in the Americas by J & S Machine, Inc.

YLMlogo.jpg

Contents

YLM Control software

The YLM Windows software allows for complete programming of bender setup. It includes a bender simulator.
YLM Main Screen.jpg

YLMsimulator.jpg

VTube-STEP and VTube-LASER Support for YLM Benders

VTube-STEP can export Supravision data to YLM benders.

VTube-LASER, the version of VTube that connects to a FARO measuring center arm, can send measured data to the YLM control for corrections.

VTube-LASER Correction Steps for YLM Benders

The connection the bender is made with standard network connection, and a shared folder location between the VTube computer and the operator station computer.

The YLM uniquely takes in VTube measured Supravision LRA data. To make a correction to a YLM bender, it is important to send only this data. The standard correction process will not work with the YLM.

===Follow these steps to import the measured data from VTube-LASER:===

  • Select the file to import. It will have a $$$ filename extension.

  • Press the Compare button to compare the measured data with the existing data.

  • Press the Import button to import the new file and change the compensation fields in the upper right corner of the Correction screen.

VTube-Laser-SaveMeasuredTubeData.jpg

YLM Import Screen.jpg

Contact Information

J & S Machine, Inc.
W6009 490th Avenue
Ellsworth, WI 54011
Phone: (715) 273-3376
Phone: (877) 273-3332
Email: [email protected]

Other Pages