Difference between revisions of "VTube Communication with YLM Benders"

From ATTWiki
Jump to: navigation, search
(VTube-STEP and VTube-LASER Support for YLM Benders)
(YLM Control software)
Line 15: Line 15:
 
<td width=200>
 
<td width=200>
 
The YLM Windows software allows for complete programming of bender setup.  It includes a bender simulator.<br>
 
The YLM Windows software allows for complete programming of bender setup.  It includes a bender simulator.<br>
 +
[[image:YLM_Main_Screen.jpg|100px]]
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>

Revision as of 17:52, 26 June 2013

YLM (Yin Lin Machine Industrial Co.) benders are built in Taiwan and distributed in the Americas by J & S Machine, Inc.

YLMlogo.jpg
YLMcncbender.jpg

Contents

YLM Control software

The YLM Windows software allows for complete programming of bender setup. It includes a bender simulator.
YLM Main Screen.jpg

YLMsimulator.jpg

VTube-STEP and VTube-LASER Support for YLM Benders

VTube-STEP can export Supravision data to YLM benders.

VTube-LASER, the version of VTube that connects to a FARO measuring center arm, can send measured data to the YLM control for corrections.

YLM Import Screen.jpg

VTube-LASER Correction Steps for YLM Benders

The connection the bender is made with standard network connection, and a shared folder location between the VTube computer and the operator station computer.

The YLM uniquely takes in VTube measured Supravision LRA data. To make a correction to a YLM bender, it is important to send only this data. The standard correction process will not work with the YLM.

VTube-Laser-SaveMeasuredTubeData.jpg

Contact Information

J & S Machine, Inc.
W6009 490th Avenue
Ellsworth, WI 54011
Phone: (715) 273-3376
Phone: (877) 273-3332
Email: [email protected]

Other Pages