VTube-STEP v2.8

From ATTWiki
Revision as of 02:04, 28 April 2017 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Vtube-step logo 2.png

Revision 2.8

Vtube-step-1.87 screenimage.png



Contents


Check.jpg NEW: UNBEND AROUND ANY STRAIGHT with ANCHOR STRAIGHTS

Previous versions would only unbend around straight one. Now we allow you to anchor the unbending in any straight.

Click on the image below to see a video for unbending.

Vtube-step v2.8 unbending with anchor straights video.png

Use this feature to unbend tubes to simulate dedicated power benders.


Vtube-step v2.8 unbend anchor straight.png

SMT dedicated power bender.png



Check.jpg NEW: TRUE VIEW ORBIT CONTROL Window

This window lets you find any true or normal orientation for any line or bend in any model.

Click on the image below to see a video of how this works.

(Note that the video shows VTube-LASER. The feature is the nearly the same for both STEP and LASER mode - except there is only a MASTER tube in STEP mode):

Vtube-laser v2.8 orbitcontrolwindow video.png

Vtube-step v2.8 trueview orbit control.png



Check.jpg NEW: TRUE VIEW TRANSFORM Window

This window lets you transform the orientation of any bend to true to the XY plane. You can also transform the tube so that any straight is aligned with the X, Y, or Z axes.

This is different than changing the orbit - which just rotates around the part. This actually rotates the part to the XY plane by changing the part centerline coordinates.

Vtube-step v2.8 trueview transform.png




Check.jpg NEW: Make Components and Imported Model INVISIBLE

Now you can make any component or collected item invisible on the screen without deleting it. You can also make the imported model invisible without deleting it.

When parts of models are invisible, then a new yellow banner displays at the top of the viewport.

The visibility is controlled with a new Visbility column in the Collected and Constructed features grids.

Vtube-step v2.8 visible checkboxes collectedfeatures.png

Vtube-step v2.8 invisible components and model.png




Check.jpg NEW: QUERY DISTANCES BETWEEN ANY TWO POINTS

Now you can query distances between any two points in the viewport. Turn the diameter off, then open the Dimension / Query window. Then select any two points on the screen and press the "Query 3D Information" button.

Use the shift key when clicking on the second point to add it to the selection.

Vtube-step v2.8 query points.png



Check.jpg NEW: DIMENSION DISTANCES BETWEEN ANY TWO POINTS

Now you can dimension distances between any two points in the viewport. Turn the diameter off, then open the Dimension / Query window. Then select any two points on the screen and press the "Build True View Dimension" button.

VTube will orbit the part so that the line is flat to the viewport, then draw a dimension.

Use the shift key when clicking on the second point to add it to the selection.

Vtube-step v2.8 dimension points.png



Check.jpg NEW: REDESIGNED CONTROL MENU (Right side)

The Control menu is completely redesigned to be more logical.

It also contains many more features than previous versions.

Vtube-step v2.8 control menu.png



Other Pages