Difference between revisions of "VTube-STEP v2.3"

From ATTWiki
Jump to: navigation, search
(25px NEW: Multi Elongation Percentage Compensation)
(25px NEW: Multi Elongation Percentage Compensation)
Line 45: Line 45:
 
A new checkbox is added at the bottom of Part Setup to allow this feature to be activated.<br><br>
 
A new checkbox is added at the bottom of Part Setup to allow this feature to be activated.<br><br>
 
[[image:vtube_v2.2_partsetup_multielongationsetup_switch.png|300px]]<br><br>
 
[[image:vtube_v2.2_partsetup_multielongationsetup_switch.png|300px]]<br><br>
If the checkbox is unchecked, then the single Tube Elongation % value is used.
+
If the checkbox is unchecked, then the single Tube Elongation % value is used to calculate elongation for all bends.
 
</td>
 
</td>
 
<td width=300>
 
<td width=300>

Revision as of 20:09, 10 February 2016

Vtube-step logo 2.png

Revision 2.3

Vtube-step-1.87 screenimage.png

Contents




Check.jpg NEW: Springback-Compensated LRA Grids

Both VTube-STEP and VTube-LASER now have Springback-Compensated grids in the Tube data, Master Tube data, and the Measured Tube data menus.

Vtube-step v2.2 springback compensated grid.png


Check.jpg NEW: Multi Elongation Percentage Compensation

VTube-STEP now allows each bend to have a unique tube elongation percentage.

The elongation percentage makes CUT LENGTHS and UNBENDING more accurate by allowing you to adjust the percentage based on the type or radius of the bend.

Use the popup menus in either the PART SETUP or the XYZ grids to get to the setup window.

Vtube v2.2 XYZpopup multielongationsetup.png

A new checkbox is added at the bottom of Part Setup to allow this feature to be activated.

Vtube v2.2 partsetup multielongationsetup switch.png

If the checkbox is unchecked, then the single Tube Elongation % value is used to calculate elongation for all bends.

Vtube v2.2 multielongation setup window.png

Check.jpg Miscellaneous Changes

  • Dashes and zeros for non-functioning values in the XYZ and LRA grids are now replaced with white spaces.



Other