Difference between revisions of "VTube-STEP v2.1"

From ATTWiki
Jump to: navigation, search
(25px NEW: Add COMPONENTS to the Collection)
(25px NEW: Add COMPONENTS to the Collection)
Line 31: Line 31:
 
* This allows components to be unbent with the new unbend feature (below).<br><br>
 
* This allows components to be unbent with the new unbend feature (below).<br><br>
 
* Components can be selected as surfaces or entire solid models.<br><br>
 
* Components can be selected as surfaces or entire solid models.<br><br>
* Since components can be ANYTHING that has a surface or is a solid, it is possible to select brackets, end components, holes, coping.   
+
* Since components can be ANYTHING that has a surface or is a solid, it is possible to select brackets, end components, holes, coping, or any other feature designed in the tube.   
 
</td>
 
</td>
 
<td width=400>
 
<td width=400>

Revision as of 21:30, 9 June 2015

Vtube-step logo.jpg

Revision 2.1

Vtube-step-1.87 screenimage.png




Check.jpg NEW: Add COMPONENTS to the Collection

This is a major new feature that allows you to add ANY solid model or surface to the collection. This type of collection is called a "COMPONENT".

  • Each component belongs to and is associated with a single straight of the tube.

  • This allows components to be unbent with the new unbend feature (below).

  • Components can be selected as surfaces or entire solid models.

  • Since components can be ANYTHING that has a surface or is a solid, it is possible to select brackets, end components, holes, coping, or any other feature designed in the tube.

Vtube-step-2.1 component selection.png

Check.jpg NEW: Unbend the Tube and Attached Components

Vtube-step-2.1 unbend model2b partial.png

This is a major new feature that allows you to unbend any bend in any order. (Click on the image on the right to see a closeup screen image of an unbent tube.)

  • Check any "Unbend" checkbox in the LRA grid, then refresh the graphics. The unbending is performed instantly.

  • Unbend the model components associated with the straights. This allows you to view components in their proper orientation in a completely unbent tube.

  • View and copy the unbent XYZ and LRA data in real-time. Use a popup menu to copy the entire grids or portions of the grids to the clipboard.

  • Convert the unbent tube to the main tube memory with bends removed.

  • Unbending always takes into account the tube elongation percentage in Part Setup. This means that tubes will unbend and the straightened arcs will shorten slightly to account for stretch.

Vtube unbend model2b.png

Vtube-step-2.1 unbend balloons.png

Vtube-step-2.1 unbend model2b complete.png
Vtube-step-2.1 unbend rectangular complete.png

Check.jpg ENHANCED: Faster Graphics and Improved Perspective Projection

The graphics viewport handles graphics faster than the previous versions.

  • FASTER POINT LABELS: The point labels draw many times faster.

  • FASTER COLLECTION: The process of building a collection (selecting surfaces and solids) is much faster in large imported assemblies. We've removed the long pauses between selection of surfaces.

  • BETTER PERSPECTIVE PROJECTION: The perspective projection is much more identifiable than in previous versions.

Vtube-step-2.1 pointlabels.png

Check.jpg New: Export to TRACTO-TECHNIK CSV File

Export to a TRACTO-TECHNIK CSV file with XYZ Data.

Vtube-step-2.1 TRACTO-TECHNIK.png

Check.jpg ENHANCED: Path Manager

Vtube-step-2.1 PathManager Closeup.png

  • The Path Manager now shows the operation for which it as asking you to choose a path.

  • Also, the Path Manager is now used for all Import and Export features.

VTube PathManager ActionContext.png

Check.jpg ENHANCED: The Path Manager Shows What Kind of Save or Load is Operating

The TYPE of file action is now displayed at the top of the Path Manager to avoid potential confusion.

Check.jpg ENHANCED: Automatically Export STEP to SOLIDWORKS

Vtube-step-2.1 STEP Export SolidWorks Import SolidWorksScreen.png

Now automatically send an exported STEP file to SolidWorks.

Vtube-step-2.1 STEP Export SolidWorks Import.png

Check.jpg NEW: Automatic Import Transparency

VTube now automatically sets the transparency of the imported model when it is imported.

The transparency value is controlled in the System Options, Graphic Setup menu.

Vtube-2.1 automatic import transparency model.png

Vtube-2.1 automatic import transparency.png


Check.jpg NEW: USER INTERFACE CHANGES

  • There is a new current VTube Project filename box in the upper left corner. This box now shows the entire path of the current project file, so that there is no doubt about which file will be saved if you press the Save button. The text in this box can be selected and copied to the clipboard.



Vtube-step-2.1 longprojectfilename.png

Check.jpg Other Changes

  • The VTube configuration file location was in "c:\ProgramData\VTube", but this caused issues for some customers with computers using restricted rights. Now it is moved to the "C:\Users\Public\Documents\VTube\Config" folder.

  • The Supravision network engine has been enhanced to handle data files that don't follow the Supravison spec perfectly.

  • We fixed a ball probe measurement issue where VTube would sometimes not always take in single points from the FARO driver. This issue created problems with measuring cut planes too. If you measured cut planes, and still couldn't get the cut plane to work properly, then it was probably due to this issue.


Other