VTube-STEP v1.89

From ATTWiki
Revision as of 04:08, 26 March 2014 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Vtube-step logo.jpg

Revision 1.89

Vtube-step-1.89 screenimage.png




Check.jpg Enhanced: Multi-colored Guide Box

The Guide Box is now multi-colored in order to give a visual cue that the viewport mode has changed.

Vtl-1.89 multicolored guidebox.png



Check.jpg NEW: QuickLoad for STEP and IGES Files

The new QuickLoad window is now used by default for loading STEP and IGES files. This window presents the files in a large easy-to-read font, and allows you to quickly search through thousands of files quickly.

Vtube-1.89-quickload upclose.png

Vtube-laser-1.89-quickload STEP.png

Check.jpg NEW: Spinner Wheel for Collection Type Selection

The new spinner wheel is much easier to use than the previous drop-down menu in the Collection control window.

It responds to mouse wheel motion and clicking and dragging.

Vts-1.89-spinner upclose.png

Vtube-step-1.89 spinner collect.png



Check.jpg NEW: Excel Report Export Window with Path Set

Excel reports are now controlled with a new export window that will save the last use Excel path in VTube.

Vtube-laser-1.89-ExcelReportExcelPath Dialog.png

Vtube-laser-1.89-ExcelReportExcelPath.png

Check.jpg NEW: Export and Import Project Configurations in System Options

Vtube-laser-1.89-importexport configuration buttons.png

It is now easy to export and import VTube configurations between different computers with VTube. The new feature is in the System Options, Project Setup tab.

Vtube-laser-1.89-importexport configuration.png

Check.jpg Other Changes

  • It is no longer necessary to exit certain selection modes before pressing the Calculate button. VTube will now automatically exit.

  • The Guide Box can be large or small based on a checkbox in the System Options User Interface menu.

  • The "Current Project Filename" value at the top of the VTube windows is now always the same as the project file saved to the disk - not the Drawing Number in Part Setup.

  • A file list refresh issue was fixed in QuickLoad.

  • The search box now always clears and receives focus when QuickLoad loads.



Other