VTube-STEP Videos
|
|
|
Version 2.1
June 11, 2015
Video Topic: Unbending
|
See a demo of VTube unbending the tube with components attached to the straights. |
|
Version 1.97
Video Topic: Data Input Types
|
See a demo of VTube importing
|
|
Version 1.96
Video Topic: General Demo
|
Michael Cone, the developer of VTube-STEP gives you demonstration of the core features of VTube-STEP version 1.96. |
|
Version 1.94
Video Topic: Springback Compensation Tutorial
|
This video shows how calculate the anticipated bend angle springback and then compensate the bend setup to make the first part shape close to the nominal shape. |
|
Video Topic: Import Solid Model and Export to Chiyoda Bender
|
This video shows how to import a solid model and export the data to a Chiyoda Bender through Benderlink for Chiyoda. |
|
Version 1.92 - July 14, 2013
Video Topic: Import and Convert an Oval Tube to Send to an Alpine M4 Bender Control
| This video shows how to import and calculate the centerline of an oval tube and then send the data directly to a Alpine M4 bender. |
|
Video Topic: Import and Convert an Oval Tube to Send to CSM M3 Bender Control
| This video shows how to import and calculate the centerline of an oval tube and then send the data directly to a CSM M3 bender. |
|
|
Video Topic: Convert Supravision File to a Spreadsheet File that can be Imported to an Eaton Leonard Laservision Tube Measuring Center
| This video shows how to convert a Supravision file to a Laservision Spreadsheet file for import into an Eaton Leonard Laservision tube measuring center. |
|
|
Version 1.87 - February 18, 2013
Video Topic: Automatically building a SolidWorks tube from VTube
| This short video shows how to build a parametric tube in SolidWorks from VTube. |
|
Version 1.84 - December 6, 2013
Video Topic: Collecting Multiple Surfaces in a Single Straight
| This video shows how to collect multiple surface patches in a single straight in order to collect the surface data in an entire straight. |
|
Version 1.83 - July 29, 2013
Video Topic: Entering Tube Print Data To Establish the Master Data
| This video shows how to enter data from a tube print in order to establish the master part data in VTube-LASER v1.83. Many of the steps apply to VTube-STEP mode, so the video is included here. |
|
|
| This video shows how to import a new XLS language file into VTube-STEP or VTube-LASER 1.83. |
|
Version 1.81.4 - March 28, 2012
Video Topic: How to Change Languages
| This short video shows how to change the language in the VTube user interface. |
|
|
Video Topic: How to Use the Language Editor
| How to edit any language for the VTube user interface using the VTube Language Editor or Microsoft Excel. |
|
|
Version 1.80 - November 23, 2012
|
How to extract a tube centerline of demo part 2 with VTube-STEP version 1.80. Note that this part has a 180 degree bend - which requires special steps for import anc calculation. |
|
Version 1.76.4 - April 20, 2012
|
How to extract a tube centerline with VTube-STEP. |
|
Version 1.76 - March 15, 2012
|
Unbending a tube with coping at either end. (Pro and LASER License Level) |
|
Version 1.75 - February 2012
|
Converting an IGES file to CSM or Alpine bender data format |
|
|
Solid Model Import of Large Diameter Tube |
|
|
How to demonstrate VTube importing the demo CAD model |
