VTube-STEP Videos

From ATTWiki
Revision as of 17:20, 2 August 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo.jpg
See VTube-STEP Videos

Vtube-step 1 65.jpg




Version 1.94

Video Topic: Springback Compensation Tutorial

This video shows how calculate the anticipated bend angle springback and then compensate the bend setup to make the first part shape close to the nominal shape.

Vtube-1.94 springback compensation video.png

Video Topic: Import Solid Model and Export to Chiyoda Bender

This video shows how to import a solid model and export the data to a Chiyoda Bender through Benderlink for Chiyoda.

Vtube-step-1.94-solidmodel to chiyoda.png

Version 1.92 - July 14, 2013

Video Topic: Import and Convert an Oval Tube to Send to an Alpine M4 Bender Control

This video shows how to import and calculate the centerline of an oval tube and then send the data directly to a Alpine M4 bender.

Vtube-step-1.92-oval to csm m3 video.png

Video Topic: Import and Convert an Oval Tube to Send to CSM M3 Bender Control

This video shows how to import and calculate the centerline of an oval tube and then send the data directly to a CSM M3 bender.

Vtube-step-1.92-oval to csm m3 video.png

Video Topic: Convert Supravision File to a Spreadsheet File that can be Imported to an Eaton Leonard Laservision Tube Measuring Center

This video shows how to convert a Supravision file to a Laservision Spreadsheet file for import into an Eaton Leonard Laservision tube measuring center.

Vtube-step-1.92-laservisionexport video.png

Version 1.87 - February 18, 2013

Video Topic: Automatically building a SolidWorks tube from VTube

This short video shows how to build a parametric tube in SolidWorks from VTube.

Vtube-step-1.87-vtube2solidworks.png

Version 1.84 - December 6, 2013

Video Topic: Collecting Multiple Surfaces in a Single Straight

This video shows how to collect multiple surface patches in a single straight in order to collect the surface data in an entire straight.

Vtube-step-1.84-collectmultiplepatches video.png

Version 1.83 - July 29, 2013

Video Topic: Entering Tube Print Data To Establish the Master Data

This video shows how to enter data from a tube print in order to establish the master part data in VTube-LASER v1.83. Many of the steps apply to VTube-STEP mode, so the video is included here.

Vtube-laser-1.83-tutorial enter tube print data.png

This video shows how to import a new XLS language file into VTube-STEP or VTube-LASER 1.83.

Vtube-1.83 tutorial importing xls chinese.png

Version 1.81.4 - March 28, 2012

Video Topic: How to Change Languages

This short video shows how to change the language in the VTube user interface.

Vtube-how-to-change-languages.jpg

Video Topic: How to Use the Language Editor

How to edit any language for the VTube user interface using the VTube Language Editor or Microsoft Excel.

Vtube-languageeditor videotutorial.jpg

Version 1.80 - November 23, 2012

How to extract a tube centerline of demo part 2 with VTube-STEP version 1.80. Note that this part has a 180 degree bend - which requires special steps for import anc calculation.

VTube-STEP 1.80 ImportingSolidModels.jpg

Version 1.76.4 - April 20, 2012

How to extract a tube centerline with VTube-STEP.

VTube-STEP 1.76.4 ImportingSolidModels.jpg

Version 1.76 - March 15, 2012

Unbending a tube with coping at either end. (Pro and LASER License Level)

Coping selection closeup.jpg

Version 1.75 - February 2012

Converting an IGES file to CSM or Alpine bender data format

Solid Model Import of Large Diameter Tube

How to demonstrate VTube importing the demo CAD model