VTube-LASER v2.9.19

From ATTWiki
Revision as of 21:45, 29 April 2019 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png


Revision 2.9.19

Release Date: April 3, 2019
Current Build: 4


Vtube-laser v2.7 screenshot.png


Check.jpgNEW - Compatible with Baces USB Arm

VTube-LASER can now connect to and control a Baces USB arm.

Vtubelaser bacesarm.png

Check.jpgNEW - VTube-STEP Mode Alpine M4 and CSM M4 export filenames can use more than 20 characters.

VTube-LASER would not allow VTube-STEP to export an MBF filename with more than 20 characters. Alpine and CSM have changed this limitation for the characters in the filename, so we have changed it in VTube-STEP as well.

Alpinelogo.pngAlpinebender.png
Csm logo.png CSM 30TBRE Bender.png


Check.jpgFIX- Important Corrections Loop Fix for the COMCO Protocol.

VTube-LASER would only make the first correction properly using the COMCO protocol. Second corrections were incorrect because of the way VTube handled the correction data column of the COMCO data. This has been fixed in this version.

Vts v2.9.18 BenderSetup COMCOCSV.png



Check.jpgNEW - Renamed for clarity: The configuration setup list in the Measure 1 menu in System Options is now called "Tolerance Configuration Profile List"

The setup list for configuration for Measure 1 inside System Options had an ambiguous name that led to confusion. We renamed it to make its purpose more clear.

Vts v2.9.19 SystemOptionMeasure1ToleranceConfigurationProfileList.png


Check.jpgNEW (VTUBE-STEP Mode) - IMPORT SUPRAVISION - Choose to Give Priority to XYZ or LRA Data Import in Supravision Files

VTube-STEP now allows you to choose which data section to give priority to during import of tube shape data in Supravision files.

This overcomes issues were data files contain XYZ data and LRA data that do not match. You choose which section you want to use as the defining data.

This logic also will ignore a section if it is invalid (ie, it is all zeros or is not present).

Vts v2.9.19 svimport sectionchoice.png

Check.jpgNEW (VTUBE-STEP Mode) - IMPORT EATON LEONARD PRT - Choose to Give Priority to XYZ or YBC Data Import in PRT Files

VTube-STEP now allows you to choose which data section to give priority to during import of tube shape data in EL PRT files.

This overcomes issues were data files contain XYZ data and YBC data that do not match. You choose which section you want to use as the defining data.

This logic also will ignore a section if it is invalid (ie, it is all zeros or is not present).

Vts v2.9.19 prtimport sectionchoice.png

Check.jpgOther Changes

  • The Tolerance Configuration Profile List will no longer be overwritten when installing new versions of VTube-LASER.



Other Pages