Difference between revisions of "VTube-LASER v2.9.12"

From ATTWiki
Jump to: navigation, search
(25pxNEW LRA POPUP MENU SPLITS ONE BEND INTO TWO)
(25pxNEW LRA POPUP MENU SPLITS ONE BEND INTO TWO)
Line 26: Line 26:
 
==[[image:Check.jpg|25px]]NEW LRA POPUP MENU SPLITS ONE BEND INTO TWO ==
 
==[[image:Check.jpg|25px]]NEW LRA POPUP MENU SPLITS ONE BEND INTO TWO ==
  
<table cellpadding=10 width=1000>
+
<table cellpadding=10 width=1200>
 
<tr valign=top>
 
<tr valign=top>
  
Line 47: Line 47:
  
 
<td>
 
<td>
[[image:vtl_v2.9.12_split_bend_into_two_adjacent.png|600px]]<br><br>
+
[[image:vtl_v2.9.12_split_bend_into_two_adjacent.png|500px]]
[[image:Split Bend Angle Into Two Bends - Slide 2.png|600px]]<br><br>
+
</td>
 +
 
 +
<td>
 +
[[image:Split Bend Angle Into Two Bends - Slide 2.png|500px]]
 
</td>
 
</td>
  

Revision as of 23:57, 10 August 2018

Vtube-laser logo 1.96.png


Revision 2.9.12

Release Date: August 13, 2018
Current Build: 1


Vtube-laser v2.7 screenshot.png

Contents


Check.jpgNEW LRA POPUP MENU SPLITS ONE BEND INTO TWO

The USAF asked us to add a feature that allowed for splitting a very sharp-angled bend into two adjacent half-bends.

This is useful for when a very high bend angle throws its intersection point far from the tube and then creates unreliably high swings in the tangent deviation and bender correction data.

Use this new feature with the SPLIT BEND measuring feature.




Follow these steps to use with Split Bend Measuring

1 - Select the bend to split in an LRA grid.

2 - Right click.

3 - Choose "Split Selected Bend into Two Bends"

4 - In the Bend Setup tab above the XYZ data, click on Split Bend Setup.

5 - In the Split Bend Setup window, set the STRAIGHT with the ZERO straight length to "Split Bend at Apex" (It will equal the BEND number + 1). Watch the data compress and highlight in the LRA grid when you exit the window.

Vtl v2.9.12 split bend into two adjacent.png

Split Bend Angle Into Two Bends - Slide 2.png



Check.jpg OTHER CHANGES



Other Pages