VTube-LASER v2.8.4

Revision 2.8.4 Original Release Date: June 22, 2017 Latest Build: 3 Back to VTube-LASER Back to VTube-LASER Updates See also VTube-STEP Updates Download in updates the VTube-LASER Support Page

BUILD 1 - NEW: MULTISCREEN "SWITCH SCREEN" BUTTONS

When multiple screens are present, then VTube now adds "SWITCH SCREEN" buttons in the toolbars. See VTube-LASER Multiple Screen Support for details.

BUILD 2 - IMPROVED: REVERSE CALC

In previous versions, when performing REVERSE CALC from bender data to centerline XYZ data, VTube-LASER could not keep the previous part orientation in 3D space when the first leg ran parallel to the Z axis. The part data on the right shows the first leg moving positive only in the Z axis. This is an example of data that could not be handled during reverse calculation. The math engine has been improved to handle this condition.

BUILD 2 - NEW: DATUM REPORT TEMPLATES - MEASURED Distances to MASTER DATUM

Previous versions of VTube could only display DATUM reports with MEASURED-ALIGNED to MEASURED-ALIGNED DATUM or MASTER to MASTER DATUM values. Now VTube-LASER can show DATUM reports with MEASURED-ALIGNED distances to MASTER Datums. To use these new report templates: Download these two new templates: Zip file of Measured to Master Datum Report Templates. Extract them to a folder location that you can find. Load VTube-LASER. Go to Reports. Click on the Templates tab. Click on Import. Find and click on the new Datum templates. Repeat at step 5 for the second template file.

BUILD 2 - IMPROVED: REPORT WINDOW TO FRONT

We've improved the REPORT window's ability to come to the top of the current window.

BUILD 3 - NEW: GERMAN TRANSLATION UPDATED

The German translation for VTube-LASER is updated and included in the installation. The translation is in the file german_v2.8.4_build3.xls.

BUILD 3 - NEW: JAPANESE TRANSLATION UPDATED

The Japanese translation for VTube-LASER is updated and included in the installation. The translation is in the file japanese_v2.8.4_build3.xls.

BUILD 3 - NEW: FRENCH TRANSLATION UPDATED

The French translation for VTube-LASER is updated and included in the installation. The translation is in the file french_v2.8.4_build3.xls.

BUILD 3 - FIX: USER INTERFACE ENGLISH GRAMMAR CORRECTIONS

Our German translator helped us correct several problems with the English in the VTube user interface.

Other Pages

• See VTube-LASER Addata ZModem Communications Protocol for more information.
• Back to VTube-LASER
• Back to VTube Software Updates (for LASER Mode)
• See also VTube-STEP
• See also VTube-STEP Revisions
• See VTube-LASER Customer Support Page to download the latest version.
• See the tutorial on DCF - Dual Cylinder Fit
• See the tutorial on DCP - Diameter Cut Planes
• See VTube-LASER Cut Planes
• See How to Measure Tubes Attached to an Evaporator with the DCP Feature