Difference between revisions of "VTube-LASER v2.8.3"

From ATTWiki
Jump to: navigation, search
(→‎25px ENHANCED: SUPRAVISION IMPORT HANDLES DATA WITH NO CENTERLINE XYZ POINTS)
(→‎25px ENHANCED: SUPRAVISION IMPORT HANDLES DATA WITH NO CENTERLINE XYZ POINTS)
Line 76: Line 76:
 
<tr valign=top>
 
<tr valign=top>
 
<td width=300>
 
<td width=300>
−
Some Supravision files contain only bender data with no centerline XYZ data.<br><br>
+
VTube requires XYZ coordinates for the parametric tube data.<br><br>
−
VTube requires XYZ coordinates for the parametric tube data. VTube now detects this situation and automatically reverse-calculates to create a new set of XYZ data when necessary.
+
However, some Supravision files contain only bender data with no centerline XYZ data.<br><br>
 +
VTube now detects this situation and automatically reverse-calculates to create a new set of XYZ data when necessary.
 
<td>
 
<td>
 
[[image:vtube-step_v2.8.3_SV Import Button.png]]
 
[[image:vtube-step_v2.8.3_SV Import Button.png]]

Revision as of 15:26, 25 May 2017

Vtube-laser logo 1.96.png


Revision 2.8.3

Original Release Date: Not Yet Released
Latest Build:


Vtube-laser v2.7 screenshot.png

Contents


Check.jpg NEW: Addata ZModem Communications Protocol

We've added an Addata ZModem communications protocol also known as the Addison "Non-Standard Device Interface".

Addata ZModem Icon Large.png

Vtube-laser v2.8.3 Addata ZModem Send.png

This protocol allows you to setup the COM port configuration to match the configuration at the other end of the serial port connection. Set the protocol to Addata ZModem, then click on the COM port cell to display this COM port configuration dialog.

See VTube-LASER Addata ZModem Communications Protocol for more information.

Vtube-laser v2.8.3 AddataZModem Benderlink ComSetup.png



Check.jpg ENHANCED: NUMALLIANCE BENDER OUTPUT HANDLES 180-DEGREE BENDS

OUTPUTS 180-DEGREE BENDS

  • The NUMALLIANCE CSV export now compresses SPLIT BENDS into a single 180-degree bends during export to the NUMALLIANCE CSV.

OUTPUTS SPRINGBACK-COMPENSATED DATA

  • The NUMALLIANCE CSV export now includes springback-compenstation if you choose that option during export.

Vtube-step v2.8.2 numalliance split bend.png




Check.jpg ENHANCED: SUPRAVISION IMPORT HANDLES DATA WITH NO CENTERLINE XYZ POINTS

VTube requires XYZ coordinates for the parametric tube data.

However, some Supravision files contain only bender data with no centerline XYZ data.

VTube now detects this situation and automatically reverse-calculates to create a new set of XYZ data when necessary.

Vtube-step v2.8.3 SV Import Button.png



Check.jpg OTHER CHANGES

  • DOCS mode import now uses the filename as the Part Number in Tube Specs (rather than the internal DOCS name of "Tube 1").

  • Some changes were made to parametric calculations so that the imported model does not randomly delete after calculation.



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_v2.8.3&oldid=34311"