Difference between revisions of "VTube-LASER v2.8.3"

From ATTWiki
Jump to: navigation, search
(Other Pages)
(25px ENHANCED: NUMALLIANCE BENDER OUTPUT)
Line 54: Line 54:
 
<br><br>
 
<br><br>
  
==[[image:Check.jpg|25px]] ENHANCED: NUMALLIANCE BENDER OUTPUT==
+
==[[image:Check.jpg|25px]] ENHANCED: NUMALLIANCE BENDER OUTPUT for COMPRESSED BENDER DATA with SPLIT BENDS==
  
 
<table cellpadding=10 width=900>
 
<table cellpadding=10 width=900>

Revision as of 15:21, 25 May 2017

Vtube-laser logo 1.96.png


Revision 2.8.3

Original Release Date: Not Yet Released
Latest Build:


Vtube-laser v2.7 screenshot.png

Contents


Check.jpg NEW: Addata ZModem Communications Protocol

We've added an Addata ZModem communications protocol also known as the Addison "Non-Standard Device Interface".

Addata ZModem Icon Large.png

Vtube-laser v2.8.3 Addata ZModem Send.png

This protocol allows you to setup the COM port configuration to match the configuration at the other end of the serial port connection. Set the protocol to Addata ZModem, then click on the COM port cell to display this COM port configuration dialog.

See VTube-LASER Addata ZModem Communications Protocol for more information.

Vtube-laser v2.8.3 AddataZModem Benderlink ComSetup.png



Check.jpg ENHANCED: NUMALLIANCE BENDER OUTPUT for COMPRESSED BENDER DATA with SPLIT BENDS

OUTPUTS 180-DEGREE BENDS

  • The NUMALLIANCE CSV export now compresses SPLIT BENDS into a single 180-degree bends during export to the NUMALLIANCE CSV.

OUTPUTS SPRINGBACK-COMPENSATED DATA

  • The NUMALLIANCE CSV export now includes springback-compenstation if you choose that option during export.

Vtube-step v2.8.2 numalliance split bend.png



Check.jpg OTHER CHANGES

  • DOCS mode import now uses the filename as the Part Number in Tube Specs (rather than the internal DOCS name of "Tube 1").

  • Some under-the-hood changes were made to parametric calculations.



Other Pages