VTube-LASER v2.5

From ATTWiki
Revision as of 22:44, 28 March 2016 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png

Revision 2.5

Vtube-laser 1.89 mainscreen.png

Contents


Check.jpg IMPROVED: Best Fit - Automatic End Weight - Tighter and Faster Alignments

We're always happy to give you a feature that does more - and does it FASTER than before. This is one of those features.

Version 2 of the Best Fit engine aligns tube shapes faster and tighter than the original. For example, a 25 second alignment is now made in 20 seconds, and a 0.013" average deviation might drop to an average of 0.009".

Version 1 was very good at tight alignments as the measured tube shape started to conform more to the master tube shape. However, version 2 creates a tighter fit faster - and handles shapes that are further from the master better.

Note: We understand that some customers are very careful with approving new part alignment algorithms - so we've left the original version 1 Best Fit in VTube to give you time to learn to trust and use Best Fit version 2.

600px

Check.jpg FIX: Automatic Image Refresh In Report Window

We discovered and fixed a problem with this feature. It works reliably now in version 2.4.

Vtube v2.4 automatic image refresh.png





Other