Difference between revisions of "VTube-LASER v2.2"

From ATTWiki
Jump to: navigation, search
(25px Other Changes)
(25px Other Changes)
Line 72: Line 72:
  
 
* Save Project now no longer displays the VTube Path Manager or Save Dialog when it already knows the project filename (listed in the project filename box in the upper left corner).
 
* Save Project now no longer displays the VTube Path Manager or Save Dialog when it already knows the project filename (listed in the project filename box in the upper left corner).
<br><br>
+
<br>
* Fixed a bug that could regularly cause the default project file to be corrupted when an operator saved new defaults.<br><br>
+
* Fixed a bug in 2.1.x that could corrupt the default configuration file when operators saved new defaults.<br>
  
 
==Other==
 
==Other==

Revision as of 02:36, 15 July 2015

Vtube-laser logo.jpg

Revision 2.2

Vtube-laser 1.89 mainscreen.png



Check.jpg NEW: PROXIMITY FILTERS for CLOUD Remove Duplicate Scanned Points

Vtube-laser-2.2 hdscanner closeup.png

The FARO HD scanners have much increased point cloud densities compared to the older scanners. Because of the new HD capabilities, it's important for VTube to handle the point cloud more carefully by removing duplicate points during scanning.

The new Proximity Filter distances makes VTube more efficient by removing any point that is close to another point already scanned. The value is a linear distance in 3D space. There are values for cylinder scans, end point scans, arc scans, and split bend scans.

The values can be adjusted in the Separation Filter tab menu in Measure Setup.


Vtube-laser-2.2 proximityfilters.png

Check.jpg ENHANCED: Improved Cut Plane Features

Vtube-laser-2.2 cutplane with tube.png

Moved "Measure Cut Plane" Button to Top

CUT PLANE has become more important as of the release of FARO's v6 HD blue laser scanner. The Cut Plane button has been moved to the top of the Measure Process menu.

Vtube-laser cutplane measureproces.png

Improved Cut Plane Offset Menu

The CUT PLANE OFFSET menu has been improved so that the offset value automatically receives FOCUS when this window is loaded.

Without clicking on the value, you can type the new value immediately, and then press the ENTER key to close the window (a new feature also).

Vtube-laser-2.2 cutplane offset focus.png

Check.jpg Other Changes

  • Save Project now no longer displays the VTube Path Manager or Save Dialog when it already knows the project filename (listed in the project filename box in the upper left corner).


  • Fixed a bug in 2.1.x that could corrupt the default configuration file when operators saved new defaults.

Other