Difference between revisions of "VTube-LASER v1.99"

From ATTWiki
Jump to: navigation, search
(25px ENHANCEMENT: "Pull Arm from Cradle" Message Removed for Automatic Scan Modes)
(25px ENHANCEMENT: "Pull Arm from Cradle" Message REMOVED for Automatic Scan Modes)
Line 30: Line 30:
 
</td>
 
</td>
 
<td width=500>
 
<td width=500>
 +
</td>
 +
</tr>
 +
</table>
 +
 +
 +
===[[image:Check.jpg|25px]] ENHANCEMENT: Arm Connected LED Lamp Added to Arm Utilties===
 +
 +
<table cellpadding=10 width=800>
 +
<tr valign=top>
 +
<td width=300>
 +
This new LED indicates that the arm is connected to the Arm Utilities menu.<br><br>
 +
 +
</td>
 +
<td width=500>
 +
[[image:vtube-laser-1.99_LED_lamp_Arm_Setup.png|400px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 01:23, 26 November 2014

Vtube-laser logo.jpg

Revision 1.99

Vtube-laser 1.89 mainscreen.png



Check.jpg ENHANCEMENT: "Pull Arm from Cradle" Message REMOVED for Automatic Scan Modes

The message is of no value when the arm is running in automatic scan mode. It should only display when the scan algorithm is set to FIXED. This saves confusion for arm users that always use AUTOMATIC modes.

So now VTube only displays the message if the scanner is setup in the VTube Project file for FIXED mode.


Check.jpg ENHANCEMENT: Arm Connected LED Lamp Added to Arm Utilties

This new LED indicates that the arm is connected to the Arm Utilities menu.

Vtube-laser-1.99 LED lamp Arm Setup.png

Check.jpg NEW: CSM M4 and Alpine M4 Bender Correction

The two bender formats - Alpine and CSM M4, were added to VTube-LASER.

This allows VTube-LASER to correct either control in a full bi-directional corrections loop.

This new feature also stores all the YBC data in the M4 format inside the VTube project files - which means the bender setup is stored along with the project and recalled when the project is loaded back into VTube.

VTube-LASER-1.99 AlpineM4BenderCorrection.png

Other