VTube-LASER v1.89

From ATTWiki
Revision as of 23:36, 24 March 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Revision 1.89


Vtube-laser 1.89 mainscreen.png





Check.jpg NEW: Excel Report Export Window with Path Set

Excel reports are now controlled with a new export window that will save the last use Excel path in VTube.

Vtube-laser-1.89-ExcelReportExcelPath Dialog.png

Vtube-laser-1.89-ExcelReportExcelPath.png

Check.jpg ENHANCEMENT and FIX: For Disappearing VTube Floating Windows

Floating control windows (like Collect, Guide, Calculate, or Tube Measure) could disappear when there are other applications also have stay-on-top windows present.

Now VTube regularly checks for these windows to be sure they are on top where they belong.

VTube-Laser-1.89-FloatingTubeMeasureWindow.png

Check.jpg ENHANCEMENT: New Sound for Calc Complete

VTube has a new soft mallet sound that indicates that the centerline calculation is complete

This new sound lets users know that the calculation is completed without having to look a the screen.

Check.jpg ENHANCEMENT: Arm Connected LED

Vtube-laser-1.89-ArmLED closeup.png
There is a new arm-connected LED that turns green if VTube is connected to the FARO arm.

Vtube-laser-1.89-armled.png

Check.jpg Other Changes

  • The DRO now reports the number of STRIPES rather than the number of POINTs when in laser scanner mode. This lets you know exactly how many stripes have been scanned on any straight or end - in order to allow you to decide if enough stripes are in memory before pressing the red button for early completion.

  • The SEND SUCCESS window will now close if you exit the Bender Data Setup window.

Vtube-laser-1.88-DRO stripecount.png

Other