VTube-LASER v1.82.1

From ATTWiki
Revision as of 20:32, 12 June 2013 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

=Revision 1.82.1

Vtube-laser 1.81.4.jpg





Check.jpg NEW: Measure Rectangular Tube

VTube now measures rectangular and square tube shapes with the laser or ball probes.

Vtube-laser-1.82 rectangulartubes scanneddata.jpg

  • FILLET EDGE DETECTION:The laser scanning feature includes edge detection in order to remove the fillet from the plane calculations. In this image, see how VTube detects edge fillets and removes them automatically from the calculation of the planes.

  • TRUE CENTERLINE LOCATION: The process and logic automatically calculates the location of the centerline from the true surface data. The nominal width data is not needed to find the centerline.



Vtube-laser-1.82 rectangulartubes aligned.jpg

Vtube-laser-1.82 rectangular scanneddata closeup.jpg




Check.jpg Other Changes

  • The viewport background has been enhanced with a gradient color.

  • Overbend Calculator is now integrated into VTube. The values are now always updated and transferred back to VTube as they are entered in the Overbend.

  • Fixed default radius bug for single straight tubes.

  • Repaired the End Label delete when tube is cleared. (The End Labels did not always clear from the screen when the tubes were cleared or turned off.)

Other