VTube-LASER v1.81

From ATTWiki
Revision as of 01:55, 19 January 2013 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Vtube-laser logo.jpg

Revision 1.81

Vtube-laser 1.81.jpg



New Winton ECNC 4 Bender Setup and Correction

Winton logo.jpg
Winton bender.jpg

  • This version can read and write ECNC version 4 offline program files.
  • Every value that can be setup in ECNC can also be setup in VTube-LASER.

Winton ecnc 4 screen.jpg

Vtubelaser winton ecnc 4 wholescreen2.jpg

Vtubelaser winton ecnc 4 screen.jpg

New Separate Report Template Setup for STEP and LASER

  • Previous versions had identical setups in both modes.
  • Some report templates are only appropriate in LASER because LASER handles inspections.
  • Now the setup of each is stored separately.


New Supravision Project Wall Thickness Import/Output

  • Previous versions did not save the wall thickness
  • This version imports and exports the wall thickness value.


New Supravision Project Qualification Tolerance Envelopes Import/Export

  • This version now imports and exports these values:
    • Default Qualification Envelope Tolerance
    • A End Length Qualification Tolerance
    • B End Length Qualification Tolerance
    • A End Angle Qualification Tolerance
    • B End Angle Qualification Tolerance


New Inspection Grid Row Count Control

  • VTube now controls the INSPECTION grid row count with the MASTER data row count rather than the MEASURED data row count.
  • This allows the grid to be populated even if the Measured data is cleared.


Other Pages