Difference between revisions of "VTube-LASER v1.62"

From ATTWiki
Jump to: navigation, search
(25px NEW: Multiple Point Qualification End Scan)
(25px ENHANCED: End Scans Faster)
Line 25: Line 25:
 
<td width=300>
 
<td width=300>
 
[[image:vtube-laser_endscan_progresswindow.jpg|300px]]<br><br>
 
[[image:vtube-laser_endscan_progresswindow.jpg|300px]]<br><br>
 +
</td>
 +
</tr>
 +
</table>
 +
 +
<br><br>
 +
 +
 +
===[[image:Check.jpg|25px]] NEW: Scan Rate Types: Timer or Distance===
 +
<table cellpadding=10>
 +
<tr valign=top>
 +
<td width=200>
 +
Now all scan rates are determined by either a TIMER or a DISTANCE.
 +
<br><br>
 +
For end-scans, use a timer and set the timer value to 0 milliseconds.<br><br>
 +
For cylinder scans, you can use DISTANCE and set the Cylinder Scan Distance to whatever value is convenient for separation.
 +
</td>
 +
<td width=300>
 +
[[image:vtube-laser_measuresetup_scanrates.jpg|300px]]<br><br>
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 05:11, 12 March 2011

Vtube-laser logo.jpg

Revision 1.62

Back to VTube-LASER

Vtube-laser 1 62.jpg



Check.jpg ENHANCED: End Scans Faster

Analysis of end scans is now much faster.

When end-scans are taking more time than a few seconds, a progress window will display.

Vtube-laser endscan progresswindow.jpg




Check.jpg NEW: Scan Rate Types: Timer or Distance

Now all scan rates are determined by either a TIMER or a DISTANCE.

For end-scans, use a timer and set the timer value to 0 milliseconds.

For cylinder scans, you can use DISTANCE and set the Cylinder Scan Distance to whatever value is convenient for separation.

Vtube-laser measuresetup scanrates.jpg



Check.jpg NEW: Multiple Point Qualification End Scan

VTube-LASER now uses multiple points to qualify the end-scan. This gives it better protection against outlier points.

A new End-Scan Fit window gives information about how many points were used in the end-trim, and the span of all the point positions. Higher point counts with lower spans indicate a better data set for end-trim.

Vtube-laser endscan fitwindow.jpg



Check.jpg REPAIR: Diameter and Wall Detection for STEP Mode

See VTube-STEP v1.62 for details.

Vtube-step 1 62.jpg



Check.jpg Other Changes



Check.jpg Issues with this version fixed in next version

  • No known issues

Other Pages