Difference between revisions of "VTube-LASER and True Position"

From ATTWiki
Jump to: navigation, search
(Popup Menu)
(Tangent Point Deviations: Spherical Radius True Position)
Line 31: Line 31:
 
</table>
 
</table>
  
==Tangent Point Deviations: Spherical Radius True Position==
+
==Tangent Point Deviation Positions Form Spherical Radius True Positions==
  
 
<table cellpadding=10 width=1000>
 
<table cellpadding=10 width=1000>

Revision as of 03:21, 19 October 2019

Vtube-laser logo 1.96.png



Vtube-laser v2.7 screenshot.png

Contents


HOW VTUBE-LASER CALCULATES GD&T TRUE POSITION

VTube-LASER actually shows the "spherical radius true position" values in more than one place in the Inspection Data.

Tangent Point Deviation Positions Form Spherical Radius True Positions

The TANGENT POINT and MIDPOINT deviations along the centerline are the equivalent of spherical radius true position values.  The deviations shown in the Tangent grid in the Inspection Data menu show these deviation values (Tangent-Midpoint-Tangent along each straight).

VTube-LASER Tan Grid.png

The master centerline includes tangent points and midpoints along the centerline.

VTube-LASER master tanmidtan.png

The aligned tangents and midpoints can be compared to the master points.

VTube-LASER master tanmidtan algined.png

The deviation from master tangents and midpoints is a true 3D distance - which means that they are spherical radius true position deviations.

VTube-LASER aligned end deviation.png



Intersection Point 3D Deviations: Spherical Radius True Position

The 3D deviations for the XYZ centerline end and intersection points are also the equivalent of spherical radius true position values.  The 3D deviations shown in the XYZ grid in the Inspection Data menu show these deviation values.

VTube-LASER XYZ deviation Grid.png



Other Pages