Difference between revisions of "VTube-LASER Videos for HEXAGON ROMER"

From ATTWiki
Jump to: navigation, search
(Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection)
(Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection)
Line 27: Line 27:
 
<td width=300>
 
<td width=300>
 
You can manually setup the Ethernet port following the steps in this short video.
 
You can manually setup the Ethernet port following the steps in this short video.
 
(Using a HEXAGON RA8 ScanArm)
 
 
</td>
 
</td>
 
<td width=200>
 
<td width=200>

Revision as of 02:46, 26 February 2020

See a list of VTube-LASER videos for ROMER Absolute Arms from HEXAGON on this page.

VTube-LASER Videos HEXAGON ROMER.png





Version 3.0

Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection

You can manually setup the Ethernet port following the steps in this short video.

Vtl v3.0 setupethnernetHEXAGON.mp4.png



Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms

Switching from probe to laser is easy with the three-way toggle button.

(Using a HEXAGON RA8 ScanArm)

Vtl v3.0 switchingprobesHEXAGON.mp4.png



Version 2.9.21

Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles

See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE.

(Using a HEXAGON 8325 ScanArm)

Vtubelaser v2.9.21.video corner profiles 002.png




Video 107: Corrections Loop with SOCO Beckhoff Controls

This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.

Vtubelaser v2.9.21.video soco beckhoff communications.png



Version 2.9.19

Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square

This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.

Vtubestep v2.9.19.video different tube types scanned.png



Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half

This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.

Vtubestep v2.9.19.video timer accept button.png



Version 2.9.18

Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend

This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.

Vtubestep v2.9.18.video calculate true radius 180-degree.png




Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm

This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.

Vtubestep v2.9.18.video reverse RZR side by side.png



Video 98: About the Small Diameter Warning

This video shows how Small Diameter Warning works along with its setup.

Vtubestep v2.9.18.video small diameter warning.png




Video 96: VTube-STEP and VTube-LASER New Radius Features

See the new radius features in this video. In Part Setup:

  • Renamed "Radius 1" (renamed from Default Radius)
  • New "Radius 2" field
  • New "Radius 3" field


In Parametric Tube grid windows:

  • See how to quickly set the radii for all bends using the synchronize radius feature.

Vtube v2.9.18.video newradius features.png



Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer

Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.

Vtl v2.9.18.video RbSABendPro demo.png



Version 2.9.17

Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM

Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).

Vtl v2.9.17.video newfeatures hexagon demo.png



Version 2.9.16

Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER

This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.

Vtl v2.9.16. attach and use RA8 scanner.png



Version 2.9.10

Video 86: VTube-LASER's LASER SCAN FILTER SOUND

This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.

Vtl v2.9.10. laserscanfilter sound.png



Video 84: Measuring Convoluted Tube and Wire with VTube-LASER

This video shows VTube-LASER's ability to measure extremely convoluted parts with a ROMER Absolute Arm with Integrated Scanner. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.

Vtl 2.9.10 convoluted tube and wire video.png


Version 2.9.4

Video 78: VTube-LASER Corrects an SMT Bender Using a ROMER Absolute Arm

This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.

Vtube-laser v2.9.4 smtcorrection video.png


Version 2

Video 2: SCANNING SPEED TEST ON TWO TYPES OF TUBES

This video shows speed tests on two very different kinds of tube shapes:

  1. An Exhaust Pipe

  2. A copper HVAC tube with two 180-degree bends

Vtube-laser v2.9.2 romer speed test video.png


Video 1: INTRODUCING VTUBE-LASER MEASURING WITH A ROMER ABSOLUTE ARM

As of November 1, 2017, VTube-LASER can measure tubes with ROMER Absolute Arms from HEXAGON. This video shows a measurement of a tube using a 3.5 meter ROMER arm.

Vtube-laser v2.9 First ROMER video.png


Other Pages