VTube-LASER Training Agenda

From ATTWiki
Revision as of 16:48, 28 September 2017 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png

Vtl screen hd scanner without logo.png

Contents



About the Training Agenda

Training agendas for VTube-LASER usually follow the pattern shown below.

We often adjust the training depending on the customer's application needs.


Number of Trainees and Types of Trainees

The number of trainees in the training depends on the role each trainee is assigned.

There are two types of trainees: Hands-on Trainee and Observer Trainee

Hands-on Trainees: 3 maximum

Hands-on trainees handle the computer and arm. n the steps we show below, many of the actions are hands-on practice. If we have 3 trainees, then the step will require 3 iterations. If we have 5 trainees, then the step will require 5 iterations. Having too many students in the hands-on training may limit how much information we can give. The fewer the number of hands-on trainees, the faster training goes.

Observer Trainees: 3 maximum

If you limit some of the trainees to observers, then the training will move more quickly, and we will be able to teach more information.

Appropriate Equipment

Large Monitors

Also, it is important to know that larger monitors are necessary for training larger numbers of trainees - whether they are hands-on or observers. For example, 6 total trainees cannot easily see a laptop monitor at the same time. It is very important to have a large monitor for a class with that many trainees. (Large = 27" or larger).

Amplified Sound

Please be sure that have amplified sound for this system so that everyone can hear the sound feedback.

Typical Training Agenda

Day 1

LESSON INSTALLATION / TRAINING TASK

COMMENTS

1

Arm installation and setup

Trainees can watch this process to learn how to setup the arm for use and take down the arm for storage.

2

Bender integration assistance

Trainees can watch us if they want to know the technical parts of setup. This part is best for an IT person.

3

Probe and scanner calibration

For operators

4

Setup a program from solid model

For engineers and operators

5

How to setup a program from a print

For engineers and operators

6

Arm connection and scanner setup

For operators

7

Measuring Cut Planes (measuring the table surface)

For operators

8

General measuring setup (set your default tolerances into VTube-LASER)

For operators

9

How to measure the tube/pipe

For operators

10

Understanding the inspection results to qualify the tube shape

For operators and engineers

11

Using the Bender Setup window to connect to benders for setup and correction

For operators

12

How to view reports

For operators and engineers

13

How to reverse-engineer a tube

For operators

14

Address any unique application needs

For operators

15

Hands-on practice

For operators

Day 2

STEP INSTALLATION / TRAINING TASK
1

Review what we learned on day 1 - quiz the trainees

2

Practice full corrections loops with actual customer parts

3

Review special application needs




Other Pages