Difference between revisions of "VTube-LASER FARO Arm Riser"

From ATTWiki
Jump to: navigation, search
(What is a Riser?)
 
(39 intermediate revisions by one user not shown)
Line 13: Line 13:
 
__NOTOC__
 
__NOTOC__
  
 
== What is a Riser?==
 
  
  
 
<table>
 
<table>
  
<tr>
+
<tr valign="top">
<td width=300>
+
<td width=400>
For tube measuring, customers often like a simple system that makes tube measuring easier by lifting the arm off the table. The riser is a simple device that raises the arm.<br><br>
+
Arm risers make tube measuring easier by lifting the arm higher over the tube shape. The effect is to make the arm feel lighter. It also gives better clearance for moving over the tube.<br><br>
</td>
+
<td>
+
[[image:vtube-laser_riser_closeup.png|400px]]
+
</td>
+
</tr>
+
<tr>
+
<td width=300>
+
===STEP 2===
+
Press Probe Setup and Calibration.</td>
+
<td>
+
[[image:vtube-laser_v2.2_armutilities_dialog_press_probesetup_and_calibration.png|400px]]
+
</td>
+
</tr>
+
<tr>
+
<td width=300>
+
  
===STEP 3===
+
The riser shown in this image was first shown at the FABTECH 2016 trade show.
Select the correct ball probe then press OK.<br><br>
+
This step will cause the FARO driver to report back to VTube the new probe.  The FARO driver should always remember the last ball probe that you set to "Current Probe" in the pulldown box.  This is true even if you shutdown VTube-LASER and the FARO arm.</td>
+
<td>
+
[[image:vtube-laser_v2.2_faro_compensation_menu.png|400px]]
+
</td>
+
</tr>
+
<tr>
+
<td width=300>
+
  
===STEP 4===
+
Two of these risers have been tested for several months (in our office and at [http://mandrelbending-tubefabrication.com/ AutoJet-Muffler].
Press the Close button in the FARO Arm Utilities window.</td>
+
<td>
+
[[image:vtube-laser_v2.2_armutilities_dialog_press_close.png|400px]]
+
</td>
+
</tr>
+
  
<tr>
+
Based on our experience, we can strongly recommend this riser at this height for measuring a tube with a 9 foot FARO ScanArm.<br><br>
<td width=300>
+
  
===STEP 5===
+
Purchase this riser in our store: [https://www.advancedtubulartech.com/shop ARM RISER in Advanced Tubular Store].<br><br>.<br><br>
Observe that the new ball probe selection will appear in the Arm grid.
+
[[image:vtube-laser_riser_closeup_whitebackground.png|300px]]
 
</td>
 
</td>
 
<td>
 
<td>
[[image:vtube-laser_2.2_measuresetup_menu_6mmball.png|400px]]
+
[[image:vtube-laser_riser_withfaroedge.png]]
 
</td>
 
</td>
 
</tr>
 
</tr>
Line 68: Line 37:
 
</table>
 
</table>
 
<br>
 
<br>
 +
 +
[[image:vtube-laser_riser_user.png|600px]]<br><br>
  
 
==Other Pages==
 
==Other Pages==
  
 
*Back to the [[VTube-LASER]] page
 
*Back to the [[VTube-LASER]] page

Latest revision as of 15:54, 23 August 2022

Vtube-laser logo 1.96.png

Vtl screen hd scanner without logo.png



Arm risers make tube measuring easier by lifting the arm higher over the tube shape. The effect is to make the arm feel lighter. It also gives better clearance for moving over the tube.

The riser shown in this image was first shown at the FABTECH 2016 trade show.

Two of these risers have been tested for several months (in our office and at AutoJet-Muffler.

Based on our experience, we can strongly recommend this riser at this height for measuring a tube with a 9 foot FARO ScanArm.

Purchase this riser in our store: ARM RISER in Advanced Tubular Store.

.

Vtube-laser riser closeup whitebackground.png

Vtube-laser riser withfaroedge.png


Vtube-laser riser user.png

Other Pages